West Instruments N6600Z210000 温度控制器-产品快照
- 品牌:
- West Instruments
- 型号:
- N6600Z210000
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,cs11@gchane.com , QQ1429311537 |
产品介绍
West Instruments N6600Z210000 温度控制器
West Instruments N6600 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 1 Output Relay
West Instruments
West N6600 Temperature Controller The West N6600 is a 1/16DIN controller that is designed specifically to provide quality process control for the Plastics Extrusion Market. This control features a special Heater Break Alarm Function which works similar to an amp meter, but alerts the operator to heater failures when they occur and prior to production problems. Quick Transfer is a one shot operation which automatically sets the alarm condition for the heater break and is based on the nominal current value. Quick Transfer allows for the automatic entry of setpoints for the heater break alarm. In addition, the Auto/Manual key can be configured for fast access to display amps or process temperature by a single key stroke. Soft Start prevents premature heater failure due to high levels of moisture in heaters at start-up. Soft Start is included on this control, and is used to dry heaters out prior to production. Soft-start is used in injection molding hot runner and other cartridge heater applications. The N6600 controller incorporates our advanced tuning algorithms, with selectable pre-tune and self-tuning. The pre-tune is used on start-up and is a one-step tuning algorithm designed to get you to setpoint fast with self-tuning being enabled near setpoint and normal operating conditions to control overshoot. The self-tune is a continuous tuning algorithm or sometimes referred to as adaptive tuning. This control can also be manual fine-tuned for specific applications Four outputs, one sensor input, one current transformer input, plus RS-485 communications option Heater break alarms reduce scrap and improve quality by detecting heater loss prior to production problems Two standard tuning algorithms: Pre-tune for fast start-up and Self-tune adaptive tuning Quick transfer automatically sets heater break alarm conditions based on the nominal current value Soft Start prevents premature heater failure due to high levels of moisture in heaters at start-up Approvals UL recognised West Instruments N Series Temperature Controllers ; Output Type Relay; Supply Voltage 100 V ac, 240 V ac; Size 48 x 48 (1/16 DIN)mm; Number of Outputs 1; Minimum Operating Temperature 0°C; Maximum Operating Temperature +55°C; Control Type ON/OFF; Configurable Outputs Relay; Display Type LED; IP Rating IP20, IP66; Panel Depth 120mm; Series N6600;
PID Temperature Controllers