STMicroelectronics L298N 驱动器-产品快照
- 品牌:
- STMicroelectronics
- 型号:
- L298N
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
欧时电子元件(上海)有限公司 |
产品介绍
STMicroelectronics L298N 驱动器
STMicroelectronics L298N Motor Driver,, 46 V 4A, 15-Pin MULTIWATT V
STMicroelectronics
L298 Dual Bridge Motor Driver The L298 from ST is an integrated high voltage, high current Dual Full-Bridge Driver. The device is designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected and the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage. FeaturesOperating supply voltage up to 46 VTotal DC current of up to 4 ALow saturation voltageOver-temperature protectionLogical "0" input voltage up to 1.5 V (high noise immunity) Motor Controllers & Drivers, STMicroelectronics ; Application Dual Full Bridge Motor Driver; Maximum IGBT Collector Current 4A; Maximum Collector Emitter Voltage 46 V; Mounting Type Through Hole; Minimum Operating Supply Voltage 4.8 V; Maximum Operating Supply Voltage 46 V; Pin Count 15; Package Type MULTIWATT V; Length 19.6mm; Width 5mm; Height 10.7mm; Dimensions 19.6 x 5 x 10.7mm; Maximum Operating Temperature +130 °C; Minimum Operating Temperature -25 °C;
Motor Driver ICs