SICK施克 STECKADAPTER KASKADE L=0,71M 齿轮-产品快照
- 品牌:
- SICK
- 型号:
- STECKADAPTER KASKADE L=0,71M
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
福建萤光电气科技发展有限公司 | 18359060969 | |
福州福诺自动化设备有限公司 | 0591-87880180 | |
广州市西克传感器有限公司 | 4000121000 | |
买道传感科技(上海)有限公司 | 021-51872140 | |
上海桂伦自动化设备有限公司 | 021-56519159 | |
深圳市中南科达科技有限公司 | 0755-86110175 | |
深圳市洲其电气自动化设备有限公司 | 0755-26016618 | |
深圳市丰德锐科技有限公司 | 0755-82526060 | |
上海锝秉工控设备有限公司 | 021-39520660 | 工业自动化控制 |
产品介绍
SICK施克 STECKADAPTER KASKADE L=0,71M 齿轮
Sick STECKADAPTER KASKADE L=0,71M Cordset, For Use With EF220.2
Sick
miniTwin Safety Light Curtain - C2MT and C4MT Series Each miniTwin stick contains both the sender and receiver elements, each symmetrically mounted in one half of a housing and separated by a central synchronisation beam. The diagram shows two identical miniTwin units offset by 180° working as both sender and receiver, in a 3 pair format. Each miniTwin can be used as part of a stand-alone pair, as 2 pair or with the additional purchase of a double plug cascade cable as a cascade (3 pair) format. When cascading in 2 pair or 3 pair there are no blind spots and the miniTwin automatically configures which pair acts as the host and which as the guest. An additional cascade cable is needed for 3 pair configurations, use 701-2962 for miniTwin up to 540mm, or 701-2971 for miniTwin over 600mm, use these to replace the detachable M12 connection plug on the rear of the miniTwin with a 2 x M12 dual plug connector. Uniquely, the MiniTwin is both sender and receiver unit integrated in a single compact housingStand-alone and cascade use and can be mounted anywhere and in any orientationCombine up to three miniTwin to create cascaded systemsNo blind zones even when systems are cascaded in corner mountingLED-guided start-upLED indicators along the length of the device serve as a rapid alignment aid, status indicator and diagnostic toolIntelligent configuration without softwareSystem plug on the back of the miniTwin can be easily moved so the cable exit is facing upwards or downwards (or replaced with a 2-way plug for cascading 3 pairs)Cascading connections and integration with safety controller always use a 5 pin M12 standard plugSimplified mounting brackets: O-Fix for flat mounting (optional extra for stand-alone use only), C-Fix for cascade structures around corners, C-Fix and L-Fix for vertical mountingEDM & remote resetUse with UE410 Flex Classic controller (480-942) or UE12 safety relays Note Two identical miniTwin-stick packages must always be ordered for a complete system.,Cable: Each miniTwin is supplied with an M12 5-pin 1-way system plug. To cascade 3 pairs you will need 2 x cascade cables. Either 701-2962 for miniTwin up to 540mm or 701-2971 for miniTwin over 600mm. These cascade cables have 2 x plugs and should be attached to the rear of your middle pair of miniTwin. The cascade extender cable 701-2974 can be used in conjunction with the 2 x cascade cables to increase the distance between miniTwin if required. Regardless of whether you use these devices stand-alone or in a 2 x pair or cascade format you will need to purchase 2 x M12 5-pin connector cable eg 523-0335.,Brackets: 2 x C-Fix and 2 x L-Fix brackets are supplied with each miniTwin. To mount (stand-alone only) as a flat installation on a profile frame or in a machine niche purchase optional O-Fix brackets 701-2978 Light Curtain ; Accessory Type Cordset; For Use With EF220.2; Size 700mm; Contact Configuration 2NC;
Automation & Control Gear>Machine Guarding & Safety>Machine Guarding Accessories