Aim-TTi TG1000 计数器-产品快照

产品介绍

Aim-TTi TG1000 计数器

Aim-TTi TG1000 Function Generator 10MHz

Aim-TTi

Aim-TTi TG1000 & TG2000 DDS Function Generators, 10MHz & 20MHz The TG1000/2000 offers a high quality direct digital synthesis (DDS) function generator at a significantly lower price. DDS generates waveforms using a phase accumulator, look-up table and DAC. The accuracy/stability of the resulting waveform is related to that of the crystal master clock. When correctly engineered, the DDS generator offers not only exceptional accuracy and stability but also high spectral purity, low phase noise and excellent frequency agility. The TG2000 includes RS-232 and USB interfaces for remote control of all instrument functions and for remotely storing instrument set-ups. 6 digits or 1mHz setting resolution1ppm stability and better than 10ppm absolute accuracy for one yearSine, square, triangle, positive pulse and negative pulse waveformsInternal sweep, linear or logarithmic, phase continuous, 0.1Hz to 20MHz Modulations modes of sweep, gated, AM, FSK and tone switching - built-in trigger generator5mV to 20V pk-pk output from 50Ω or 600Ω; plus multi-function auxiliary outputStorage for up to nine complete instrument set-ups in non-volatile memory Sine Wave   Frequency Range 1mHz to 10MHz/20MHz; resolution 6 digits or 1mHz Distortion Square Wave and Positive/Negative Pulse   Frequency Range 1mHz to 10MHz/20MHz; resolution 6 digits or 1mHz Rise & Fall Times Symmetry Variable 20 % to 80 % in 1 % steps Triangle Wave   Frequency RangeLinearity Error 1mHz to 1MHz; resolution 6 digits or 1mHz Output Level   Sine/Square/Triangle 5mV to 20V pk-pk from 50Ω/600Ω source (switchable) Pulse 2.5mV to 10V pk-pk from 50Ω/600Ω source, positive or negative pulses with respect to DC offset baseline Accuracy & Flatness ± 3% ± 1mV at 1kHz into 50Ω/600Ω. Flatness ± 0.2dB to 500kHz; ± 1dB to 20MHz DC Offset ± 2.5mV to ± 10V from 50Ω/600Ω source Internal Sweep   Sweep Width 0.1Hz to 20MHz; single range; lin or log; phase continuous Sweep Time 20ms to 999s (3 digit resolution); triggered or continuous Trigger and Marker Trigger from front panel or remote interface; variable marker output Modulations   Modulation Modes External AM; Int/Ext Gate; Int/Ext FSK; Int/Ext Tone Trigger Generation Trigger signals can be generated from an internal trigger generator, a front panel key, an external input, or a remote interface Outputs and Inputs   Outputs Main - 50Ω/600Ω. switchable, Aux - Multifunction logic level output Inputs VCA In - amplitude modulation I/P; External Trigger Gate I/P Interfaces   RS-232 Variable baud rate, 19.200 max., 9 pin D connector USB Conforming with USB1.1 General   Power Requirement 220-240V, 110-120V or 110V ±10 % 50/60Hz; Installation Category II Size and Weight 260 x 88 x 235mm. 2.0kg Standards Complies with EN61010-1 and EN61326 Supplied with Mains lead and full instructions Function Generators: Digital Synthesis ; Maximum Frequency Range Sinewave 10MHz; Minimum Frequency Range Sinewave 1MHz; Maximum Frequency Range Square Pulse and Arbitrary Waveform 10MHz; Minimum Frequency Range Square Pulse and Arbitrary Waveform 1 mHz; Maximum Frequency Range Triangle/Saw 1MHz; Minimum Frequency Range Triangle/Saw 1MHz; Digital Frequency Yes; Digital Amplitude and Offset Yes; Internal Linear and Log Sweep Yes; Variable Sweep Yes; Internal and External Amplitude Modulation Yes; FM Modulation Yes; Time Base Accuracy ±10ppm; Output Impedance 50 Ω, 600 Ω; Plug Type Type C - European Plug, Type G - British 3-pin; Height 88mm; Model Number p TG1000; Width 260mm; Maximum Operating Temperature +40°C; Weight 2kg; Input Impedance 10 kΩ; Output Amplitude 20V Pk-Pk; Length 235mm; Dimensions 235 x 260 x 88mm; Minimum Operating Temperature +5°C; Frequency Range Square Pulse and Arbitrary Waveform 1 mHz → 10 MHz;

Function Generators & Counters