RS Pro E10 Filament Indicator Lamp, Clear, 60 V, 50 mA, 3000h 灯具-产品快照
- 品牌:
- RS Pro
- 型号:
- E10 Filament Indicator Lamp, Clear, 60 V, 50 mA, 3000h
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，as10@gchane.com , QQ3350168184
|
产品介绍
RS Pro E10 Filament Indicator Lamp, Clear, 60 V, 50 mA, 3000h 灯具
E10 Filament Indicator Lamp, Clear, 60 V, 50 mA, 3000h
RS Pro
T-3 (10mm) Tubular MES Filament lamps will perform to specification and give optimum life when:a) They are powered at the rated voltage from a stabilised 50 Hz AC supply.b) Ambient temperature is in the range 20°C to 25°C.c) No mechanical vibration is present.Deviations from these criteria have a significant effect on lamp life, particularly with low current filaments (Power from a DC supply at the rated voltage can reduce the listed life by up to 50%.The effect of deviation from the rated operating voltage should be noted:5% above will reduce lamp life by up to 50%.5% below will significantly increase lamp life.Power consumption may vary up to ±10% compared to the listed values at the rated supply voltage. Therefore particular care should be taken when a number of lamps are connected in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps. Screw (LES, MES, SES) Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6. ; Voltage Rating 60 V; Lamp Base E10; Current Rating 50 mA; Diameter 10mm; Lamp Size T3 1/4; Length 28 mm; Lens Colour Clear; Luminosity 10.5 lm; Life Hours 3000h;
Filament Indicator Lamps
更多产品:
更多品牌:
