Microchip MCP4141-103E/P 电位器-产品快照
- 品牌:
- Microchip
- 型号:
- MCP4141-103E/P
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
欧时电子元件(上海)有限公司 | ||
上海贸泽电子有限公司 |
产品介绍
Microchip MCP4141-103E/P 电位器
MCP4141-103E/P, Digital Potentiometer 10kΩ 129-Position Linear Serial-SPI 8-Pin PDIP
Microchip
MCP414x/416x/424x/426x Digital Potentiometers The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers with a SPI interface and EEPROM memory.Featured is WiperLock Technology, providing a method of locking the wiper configuration. To unlock a high-voltage command is required (>8.5 V), protecting the setting during normal operation.7-bit (129 steps) and 8-bit (257 steps) versions are available in various RAB resistance options from 5 kΩ to 100 kΩ. Further variants also give the choice between Rheostat and Potentiometer pinouts, Single and Dual Resistor Network options are also available. FeaturesZero Scale to Full-Scale Wiper OperationLow Wiper Resistance: 75 Ω (typical)Low Temperature Coefficient: Absolute (Rheostat) 50 ppm, Ratiometric (Potentiometer) 15 ppm (typical)Automatic Recall of Saved Wiper SettingWiperLock TechnologySPI Serial InterfaceResistor Network Terminal Disconnect FeatureBrown-Out Reset Protection: 1.5 V (typical)Serial Interface Inactive Current: 2.5 μA (typical)High-Voltage Tolerant Digital Inputs: Up to 12.5 VSupports Split Rail ApplicationsInternal Weak Pull-Up on all Digital InputsWide Operating Voltage: 1.8 V to 5.5 VWide Bandwidth (-3 dB) Operation: 2 MHz for 5.0 kΩ device (typical) Model VariantsPotentiometer Wiper Configuration: MCP4141, MCP4161, MCP4241, MCP4261Rheostat Wiper Configuration: MCP4142, MCP4162, MCP4242, MCP4262Single Resistor Network: MCP4141, MCP4142, MCP4161, MCP4162Dual Resistor Network: MCP4241, MCP4242, MCP4261, MCP42627-bit, 128 Resistors (129 steps): MCP4141, MCP4142, MCP4241, MCP41428-bit, 256 Resistors (257 steps): MCP4161, MCP4162, MCP4261, MCP4162 Digital Potentiometer - Microchip ; Control Interface Serial-SPI; Resistance Value 10kΩ; Number of Positions 129; Taper Type Linear; Memory Type Non-Volatile; Number of Pots per Package 1; Mounting Type Through Hole; Package Type PDIP; Pin Count 8; Power Supply Type Single; Typical Single Supply Voltage 1.8 to 5.5 V; Dimensions 0.4 x 0.28 x 0.195in; Height 0.195in; Minimum Operating Temperature -40 °C; Length 10.16mm; Maximum Operating Temperature +125 °C; Width 0.28in;
Digital Potentiometers