Solartron Metrology 911315-RS 变压器-产品快照
- 品牌:
- Solartron Metrology
- 型号:
- 911315-RS
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，as10@gchane.com , QQ3350168184
|
产品介绍
Solartron Metrology 911315-RS 变压器
Solartron Metrology LDVT 0°C +50°C, -10 → +10V dc
Solartron Metrology
OD5 Conditioning Module External PSU used, allows OD5 case to be smaller and isolates the mains voltage to make it safer120Va.c. or 240Va.c. operation and suitable for use with all a.c. LVDTs and most othersWide range span and zero control with both -10 to 10V and -20 to 20mA outputsGain and offset adjustment fully independentSelectable transducer excitation frequency and load resistancesForward and reverse connection selection, saves swapping wires in the connectorHoused in a robust die cast aluminium box with a 5-pin DIN connectorHalf-bridge transducers accommodated with a simple plug wiring change Power Supply Mains Voltage 90 to 264Vac AC Input Frequency 47 to 63Hz AC Input Current 0.25A (120Vac), OI. 1A(250Vac) Transducer Excitation Transducer Drive 3V rms nominal at 2.5kHz (Lo) or 5kHz (Hi) nominal. Rated 30mA max. Transducer Signal Input Sensitivity Range 400 to 2500mV (full range) (LVDT only) Signal Output Output Voltage Range Up to ±10Vdc into 1KΩ min. Output Residual Noise >1mVrms Output Current Up to ±20mA into 150Ω load Temp. Coefficient Gain/Offset >0.1% full range/°C Warm-up 15 minutes recommended Linearity >0.1% full range Temperature Range 0°C to +50°C IP Rating IP40 Input/Output Protection Short ciruit protected, transient and ESD protection Mechanical & Connections Tranducer 5-pin circular DIN Power Supply Cable Length 1.8m max. Mains Connector IEC320 C14 Enclosure/Power Supply 120 x 65 x 40mm and 65 x 49 x 33mm Certification BS EN61000-6-2/3:2001;EN60950: CSA22.2: UL1950 Supplied with Instructions and 5-pin DIN plug. Linear Variable Differential Transformers (LVDT) These devices comprise a movable nickel iron core and three coils - one for energisation and two for pick-up. They need to be driven by a sine wave to produce an output amplitude and phase directly proportional to the position of the core with respect to the pick-up coils. A phase sensitive detector is required to demodulate the output signal. The main advantages of LVDTs are; No wear problems as with potentiometersInfinite resolution, high accuracy and linearityNo friction introduced into the measured systemAvailable in ranges from ±1mm to ±50mm Note RS LVDT's datasheet Stock No. 232-4049 is available on request. ; Input Current Range 0.25 A, 1.1 A; Energising Voltage Range 90 → 264 V ac; Output Voltage Range -10 → +10V dc; Sensitivity 400 → 2500 mV; Minimum Operating Temperature 0°C; Maximum Operating Temperature +50°C;
Differential Transformers
更多产品:
更多品牌:
