Seeit SUPERPRO-611S-产品快照
- 品牌:
- Seeit
- 型号:
- SUPERPRO-611S
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，cs11@gchane.com , QQ1429311537
|
产品介绍
Seeit SUPERPRO-611S
Seeit SUPERPRO-611S, High Speed Universal Programmer for ARM9 32 bit MCU, EPROMs, Flashs, PLDs
Seeit
SUPERPRO® 601S, High-Speed Universal Programmer, Stand-Alone, USB 2.0 The SuperPro-601S is an universal programmer equipped with ARM9 processor with a USB 2.0 interface. Based on the 48-pin ZIF socket it can program over 38000 differents components among EPROMs, EEPROMs, FLASHs memories, PLDs and microcontrollers. An LCD display screen of 20 x 2 characters, as well as a keypad, allow to use this programmer in stand-alone mode. In Stand-Alone mode of the SuperPro-601S, you can download and add numerous algorithms using the optional compact Flash card (512Mb or 1Gb) inserted in the back of the programmer. It can program low voltage components down to 1.2V. It doesn’t need any adapters for any SDIP packages. The programming is extremely fast based on the the use of algorithm technology downloaded in the CPU of the programmer during the selection of a device. An optional ISP adapter permit to program components soldered on printed circuits or devices in special packages. The software runs under Windows 98/ME/NT/2000/XP/Windows7/Windows8 (32/64-Bit). It allows advanced production functions such as automatic programming as soon as the device is detected, verification of the device ID and automatic generation of serial numbers in the device. Updates can be download freely. Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, MicrocontrollerPackages supported: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, and moreComputer interface with USB 2.0Stand-alone feature is supported by Compact Flash CardAC Power Adapter input 90V to 250V, 50/60Hz, DC output 12V/2A; power: 15WDimensions: 178 x 130 x 40 mm Kit ContentsProgrammer with 48-pins ZIF socketPower adaptor 90-260Vac to 12VdcUSB-B to USB-A cableSoftware on CD-ROMUser manual in English and French Stand Alone Programmers ; Accessory Type High Speed Universal Programmer; For Use With ARM9 32 bit MCU, EPROMs, Flashs, PLDs; Interface USB 2.0;
Semiconductors>Chip Programmers & UV Erasers>Chip Programmers
更多产品:
更多品牌:
