| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，cs10@gchane.com , QQ1653501665
|
产品介绍
Aim-TTi MX180T
Aim-TTi MX180T Bench Power Supply, 3 Output
Aim-TTi
Aim-TTi MX180T & MX180TP Triple Output Power Supplies The MX180T ( 895-2491 ) has two outputs each capable of 0 to 30V at 0 to 6A, plus a third output of 0 to 5.5V at 0 to 3A. Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch. The MX180TP ( 895-2495 ) incorporates USB, RS232, GPIB and LXI compliant LAN interfaces. These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.The Aim-TTi MX series provides impressive power density by combining high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design. Excellent line and load regulation is matched by low noise and good transient response. To increase its ability to match a variety of applications, each output has more than one range. Outputs one and two can provide either 60V/3A or 15V/10A as an alternative to 30V/6A, while output three can provide 12V/1.5A. When higher power is required, outputs one and two can be combined internally to provide up to 360 watts as either 30V/12A, 15V/20A, 60V/6A or 120V/3A from a single output. Three high performance outputs, two of 180 watts each and one of 18 watts Total power of 378 watts in a highly compact package Range switching gives up to 120 volts and up to 20 amps 21 range combinations for maximum flexibility Up to 360 watts from a single output Low output noise and ripple via linear final regulation High setting resolution of 1mV and 1mA Variable OVP and OCP trips on all outputs 50 setting memories per output + 50 linked memories Selectable voltage tracking (isolated tracking) Selectable current meter averaging Switchable remote sense on all outputs Graphic LCD provides simultaneous output metering Numeric or spin-wheel control of all parameters Individual or combined output on/off control with programmable delay sequencingFront panel locking with optional pass-code protection 3U half-rack case for bench or rack mounting Aim-TTi - Mixed Mode Regulation ; Output Voltage 0 → 12 (Output 3) V, 0 → 120 (Output 1) V, 0 → 60 (Output 2) V; Output Current 1 mA → 3 A (Output 1 and 2), 10 mA → 1.5 A (Output 3); Number of Outputs 3; Type Digital; Power Rating 18 (Output 1) W, 180 (Output 2) W; Supply Voltage 110 → 240V ac; Number of Displays 1; Minimum Temperature +5°C; Maximum Temperature +40°C;
Test & Measurement>Bench Power and Power Measurement>Bench Power Supplies
更多产品:
更多品牌:
