Dayton 5DVP5 风扇和暖通空调通风机-产品快照
- 品牌:
- Dayton
- 型号:
- 5DVP5
- 重量:
- 13.8243 kg
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，cs10@gchane.com , QQ1653501665
|
产品介绍
Dayton 5DVP5 风扇和暖通空调通风机
Exh Vent, 3 Spd, 11 Whl, 115 V, Wall Mnt
Dayton
Exhaust Ventilator, Centrifugal Upblast Direct Drive, 3 Speed, Wheel Dia. 11 In., CFM @ 0.000-In. SP 811/680/549, @ 0.125-In. SP 744/600/451, Sones @ 0.250-In. SP @ 5 Ft. 7.5/5.4/4.2, Motor Voltage 115, 1 Phase, 60 Hz, Max. Operating Amps 2.44/1.82/1.48, Motor HP 1/15, Base Width 17 7/8 In., Base Length 17 7/8 In., Mounting Location Wall, Max Inlet Temp 130 Deg F, Speed Control 1DGV1, Includes NEMA 1 Junction Box Restrictions Note: Speed controllers available for 115V units only. For kitchen application, check with local code authorities for minimum duct velocities. Do not use dampers in any kitchen application. NFPA 96. Centrifugal Direct-Drive Upblast Exhaust Ventilators 3-Speed For general clean air with inlet air temps. below 130 F. 3 specific RPMs; speed controllable on any RPM providing 30% useable turndown. UL 705 Listed for Power Ventilators. Aluminum, backward-inclined wheel 1-piece rolled aluminum windband fully welded to base Motor, drive frame, and blower wheel are isolated from mounting base Motor compartment is isolated from contaminated air NEMA 1 junction box in motor enclosure (Hazardous units have NEMA 7 & 9 disconnect switch) UL and C-UL Listed (Motor only UL Listed for Class I Groups C & D, and Class II Groups F & G for hazardous location units)
Item Exhaust Ventilator Type Centrifugal Upblast Direct Drive, 3 Speed Wheel Dia. (In.) 11 CFM @ 0.000-In. SP 811/680/549 CFM @ 0.125-In. SP 744/600/451 CFM @ 0.250-In. SP 677/517/306 CFM @ 0.375-In. SP 604/391/- CFM @ 0.500-In. SP 501/-/- CFM @ 0.625-In. SP 347/-/- Sones @ 0.125-In. SP @ 5 Ft. 7.6/5.4/3.9 Sones @ 0.250-In. SP @ 5 Ft. 7.5/5.4/4.2 Motor Voltage 115 Phase 1 Hz 60 Max. Operating Amps 2.44/1.82/1.48 Motor HP 1/15 Max. BHP 0.09 RPM 1550/1300/1050 Base Width (In.) 17-7/8 Base Length (In.) 17-7/8 Base Height (In.) 1-3/4 Overall Dia. (In.) 21 Overall Height (In.) 21 Shaft Dia. Wheel End (In.) 1/2 Mounting Location Wall Max. Inlet Temp. (Deg. F) 130 Housing Material Spun Aluminum Wheel Material Aluminum Wheel Type Backward Incline Speed Control 1DGV1 Speed Controllable Yes Agency Compliance UL cUL 705 Includes NEMA 1 Junction Box Recommended Damper Size (In.) 10 x 10 Recommended Damper Stock No. 4HX73 UNSPSC 40101502 UPC 094713607601 Weight 30.450000
Fans & HVACR Ventilation Ventilators
更多产品:
更多品牌:
