BSC3SMRD-产品快照
- 品牌:
- BSC3SMRD
- 型号:
- BSC3SMRD
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,cs11@gchane.com , QQ1429311537 |
产品介绍
BSC3SMRD
Sescom - BSC3SMRD - Belden Star-Quad Cable 1/4-Inch TS Male to 3.5mm TS Male 3 Foot - Red
BSC3SMRD
World's Finest 1/4-Inch TS Male to 3.5mm TS Mono Male Plug Star-Quad Audio Cables hand crafted in our shop featuring Belden 1192A Low-Noise Cable. Cables are built with the highest quality connectors from Neutrik, Connectronics & Switchcraft. Belden microphone cable is used for connecting low level microphones or musical instruments. Key properties of microphone (MIC) cable are ruggedness, flexibility, flex life and interference immunity. Cable construction utilizes a 4 conductor configuration. Quad MIC cables are connected by attaching the two white conductors to one pin and two blue conductors to the other pin in a balanced-line XLR type connector. Besides the common-mode rejection of a standard balanced line, this gives common-mode rejection at each pin, greatly reducing noise and interference. All Belden microphone cables utilize only HIGH CONDUCTIVITY copper produced by a process called ELECTROLYTIC TOUGH PITCH. This refining process produces a copper conductor that is 99.95% pure copper resulting in HIGH CONDUCTIVITY per ASTM B115. The high purity obtained from ETP copper results in microphone cable performance that is comparable to that of oxygen free copper cables. Features: StarQuad (4 conductor) Improved noise & hum rejection 6 colors Low-Impedance Cable Ultimate performance Efficient technology Optimal transmission Specifications: Conductors: 4 Conductor AWG: 24 Conductor Stranding: 42x40 Conductor Material: SBC - Soft Bare Copper Conductor Dia. (in.): 0.024 Insulation Material: PE - Polyethylene Insulation Material Wall Thickness (in.): 0.016 Insulation Material Dia. (in.): 0.056 Outer Shield Type: Braid Outer Shield Material: TC - Tinned Copper Outer Shield Coverage (%): 95 Outer Jacket Material: PVC - Polyvinyl Chloride Outer Jacket Nom. Wall Thickness (in.): 0.045 Max. Recommended Pulling Tension: 21 lbs. Min. Bend Radius (Install)/Minor Axis: 2.450 in. Nom. Characteristic Impedance (Ohm): 40 Nom. Inductance (H/ft): 0.21 Nom. Capacitance Conductor to Conductor (pF/ft): 39.2 Nom. Cap. Between Cond. in a Quad Config. (pF/ft): 57.4 Nominal Velocity of Propagation (%): 66 Nom. Conductor DC Resistance: Max. Operating Voltage - UL: 100 V RMS See other products in some related categories (click to browse): Main Tree > Cable Zone > Cable Management > Audio Cables