DAYTON 3BB79 泵污水泵,污水泵和污水泵潜水泵-产品快照
- 品牌:
- DAYTON
- 型号:
- 3BB79
- 重量:
- 14.074 kg
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,as10@gchane.com , QQ3350168184 |
产品介绍
DAYTON 3BB79 泵污水泵,污水泵和污水泵潜水泵
1/2 HP Submersible Sump Pump, Diaphragm Switch Type, Cast Iron Base Material
DAYTON
Dayton submersible sump pumps are self-contained and recommended for use in a sump or basin, which should be vented in accordance with local plumbing codes; the pumps are made to handle water that will not drain by gravity. Designed to pump rain water or light effluent, nonexplosive and noncorrosive liquids, and shall not be installed in locations classified as hazardous in accordance with the United States National Electrical Code (NEC), ANSI/NFPA 70. These pumps can be located in foundation drains in homes or buildings, parking lots, rainfall pooling in low land areas, manholes, retention ponds and truck docks. Never install the pump in a trench, ditch, or hole with a dirt bottom; the legs will sink into the dirt and the suction will become plugged. Item Submersible Sump Pump HP 1/2 Switch Type Diaphragm Cord Length 15 ft. Voltage 115 Amps 9.8 Diameter 10" Discharge NPT 1-1/2" Height 12-1/4" Max. Head 32 ft. Max. Dia. Solids 1/2" GPM of Water @ 5 Ft. of Head 80 GPM of Water @ 10 Ft. of Head 70 GPM of Water @ 15 Ft. of Head 62 GPM of Water @ 20 Ft. of Head 50 GPM of Water @ 25 Ft. of Head 40 GPM of Water @ 30 Ft. of Head 20 Max. Temp. 104 Degrees F Off Point 5" On Point 14-1/2" Base Material Cast Iron Housing Material Cast Iron Impeller Material Cast Iron Duty Continuous Bearing Type Upper and Lower Shaft Seal Silicon Carbide Mechanical Seal SiC Motor Type Oil-Cooled Alarm No Hz 60 HZ Max. Liquid Temp. 104 Degrees F Gauge/Conductor 18/3 NEC Cord Designation SJTOW
Pumps Sump, Effluent and Sewage Pumps Submersible Sump Pumps