DAYTON 4JMV3 泵离心泵耐化学泵-产品快照
- 品牌:
- DAYTON
- 型号:
- 4JMV3
- 重量:
- 13.62 kg
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，as10@gchane.com , QQ3350168184
|
产品介绍
DAYTON 4JMV3 泵离心泵耐化学泵
304 Stainless Steel 1/2 HP Centrifugal Pump, 1 Phase, 115/230 Voltage
DAYTON
Stainless Steel Centrifugal Pumps are designed for continuous duty and are intended for use with clear, non-abrasive and nonflammable liquids compatible with the pump material make-up. These pumps are a non-self priming, gravity feed design; they will pull water a maximum of 15 ft. with the pump and suction line completely filled with water and a foot valve on the end of the suction line. Pumps operate with a 3450RPM motor. Single phase pump motors have thermal protection; it automatically shuts off with sudden rises in temperature and restarts after cooling down. All models are manual mode and require field wiring, no controls are supplied. Check motor wiring before putting units into operation (see motor nameplate for specific wiring diagram) Item Centrifugal Pump HP 1/2 Phase 1 Inlet 3/4" NPT Voltage 115/230 Amps 7.2/3.6 Housing Material 304 Stainless Steel Impeller Material 304 Stainless Steel Seal Material Viton, Carbon, Ceramic, SS Seal Type Mechanical Outlet 3/4" NPT Motor Enclosure ODP Max. Head 50 ft. Max. GPM @ Head 38 gpm @ 5 ft. Best Efficiency GPM @ Head 28 gpm @ 22 ft. Min. GPM @ Head 5 gpm @ 40 ft. Best Efficiency Range GPM @ Head 24-33 gpm @ 28-12 ft. Length 13-5/16" Width 6-1/2" Height 7-7/8" Hz 60 NEMA/IEC Frame 56J Motor RPM 3450 Motor Type PSC Service Factor 1.5 Wetted Materials Carbon, Ceramic, 304 Stainless Steel, Viton Shaft Material Stainless Steel Screw Material Stainless Steel Max. Liquid Temp. 200 Degrees F Max. Specific Gravity 1.0 Max. Case Pressure 150 psi Max. Fluid Viscosity 31 SSU Inlet Pressure 128 psi Impeller Type Closed Bearing Type Ball Duty Continuous Max. Dia. Solids 1/8" Port Rotation 90 Degrees Increments Drain Plug No Agency Compliance CUS Manufacturers Warranty Length 1 yr. Application Liquids Transfer, Circulation, Chemical Processing, Cooling, Pressure Boosting and Circulating Includes Manual GPM of Water @ 5 Ft. of Head 38 GPM of Water @ 10 Ft. of Head 34 GPM of Water @ 15 Ft. of Head 32 GPM of Water @ 20 Ft. of Head 29 GPM of Water @ 25 Ft. of Head 26 GPM of Water @ 30 Ft. of Head 20 GPM of Water @ 40 Ft. of Head 5
Pumps Centrifugal Pumps Chemical-Resistant Pumps
更多产品:
更多品牌:
