Minarik Drives MC10-PCM 电机驱动器和附件驱动DC-产品快照
- 品牌:
- Minarik Drives
- 型号:
- MC10-PCM
- 重量:
- 1.698 kg
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，cs10@gchane.com , QQ1653501665
|
产品介绍
Minarik Drives MC10-PCM 电机驱动器和附件驱动DC
Minarik Drives DC Drives, MC10 Series
Minarik Drives
Overview Minarik Drives DC Drives, MC10 Series Item# MC10-PCM - Drive, Pot Incl. MC10 Series Information NEMA 4X Enclosure: Plastic Corrosion Resistant Weatherproof Enclosure that Protects Against Dirt and Splashing Water Speed Range and Regulation: 1% Regulation Over 60:1 Speed Range User Adjustable Calibration Pots: IR Compensation, Minimum Speed, Maximum Speed, Torque Limit, Acceleration, and Deceleration. The MC10‑PCM Unit Also has Signal Min and Signal Max Pots Diagnostic LEDs: LEDs for Power and Current Limit Status Stopping Modes: Inhibit (N/O) for Coasting to a Stop The MC10 Series provides a reliable and economical solution for variable speed control of permanent magnet, or shunt wound brush DC motors from 1/8 to 2 horsepower. Housed in a NEMA 4X enclosure, the dual voltage MC10 Series is ideal for washdown applications and provides protection from moisture, windblown dust and incidental contact. Included are power and current limit LEDs, line fuses, inhibit pins for remote start/stop, and a speed adjust knob mounted on the front cover. In addition, the MC10 model includes an On/Off switch on the front cover; the MC10‑R model‑ a Forward/Off/Reverse switch; and the MC10‑PCM model‑ an On/Off switch and a Manual/Signal switch. With excellent control and a plastic NEMA 4X enclosure, the MC10 Series is the perfect solution for many applications that require an enclosed drive. Mounted Operators: Speed Adjust Knob Located on Front of Case for Easy Operation. MC10‑R Includes Direction Switch and MC10‑PCM Includes Signal/Manual Switch Screw Terminal: Quick and Easy Wire Connections Analog Input Reference: MC10‑PCM Can Accept a 0‑10VDC or 4‑20mA with Addition of a Shunt Resistor Accessories: 201‑0024 Inhibit Plug with 18" Leads, DLC600 Digital Closed Loop Controller Item Number: MC10-PCM Brand: Minarik Drives Item Category: Drives Subcategory: DC Series: MC10 Input VAC: 104 to 127/207 to 253 Volts AC Output Armature VDC: 0 to 90/0 to 180 Volts DC Max HP @ 90VDC Armature: 1 Horsepower Max HP @ 180VDC Armature: 2 Horsepower Input Phase: 1 Output Field Amps DC: 1 Amps Max Armature Amps DC: 10 Amps Operator Controls: Built In Enclosure Rating: NEMA 4X Package: Enclosed Temperature Range (F): 50 to 104 Degrees F Approvals: UL,cUL Comments: Potentiometer Included. H x W x D: 8 in x 6 in x 4.75 in Net Weight: 3 lb 12 oz Gross Weight: 3 lb 12 oz
Motors Drives & Accessories Drives DC
更多产品:
更多品牌:
