Acme Electric DTFA-075-4S 电力和电子变压器驱动隔离变压器-产品快照
- 品牌:
- Acme Electric
- 型号:
- DTFA-075-4S
- 重量:
- 237.72 kg
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，cs10@gchane.com , QQ1653501665
|
产品介绍
Acme Electric DTFA-075-4S 电力和电子变压器驱动隔离变压器
Acme Electric Drive Isolation Transformers, DT Series
Acme Electric
Overview Acme Electric Drive Isolation Transformers, DT Series Item# DTFA-075-4S - TRANSFORMER 75KVA 3PH ENCLOSED 230VAC PRI 230Y/133VAC SEC DT Series Information 3-Phase 60 Hertz 180 degrees and 220 degrees C Insulation Systems Designed for Use With AC, Adjustable Frequency or DC Drives Full Range of KVA Ratings Cover All Standard Drive Systems Ample Wiring Compartment for Easy Cable Entry The Acme Drive Isolation Transformers are specifically designed to accommodate the special voltages and KVA sizes unique to AC and DC motor drive applications. Acme uses strip conductors (above 7.5 KVA) instead of wire for DIT series that easily accommodates the servere electrical and mechanical stresses found in today's AC & DC motor drives. The inherent excellent line isolation of these transformers is further enhanced with the extra protection of Acme's Electrostatic Shield ‑ Free in all DIT's. The harmonic current generated by AC & DC drives increases eddy current losses (heat) in transformer windings. The thicker the winding conductor, the greater the losses. Acme uses one turn per layer of thin strip conductor which provides lower eddy current lossesthan comparable wire wound units. Lower losses equals cooler operation and longer transformer life. Strip windings minimize axial short circuit forces that can cause mechanical displacement of the windings under fault conditions. For extra protection all designs 7.5 KVA and above use primary and secondary coils of equal axial length. This feature tends to negate axial short circuit forces, further imporving transformer life expectancy. Item Number: DTFA-075-4S UPC: 047503440759 Brand: Acme Electric Item Category: Transformers Subcategory: Drive Isolation Transformers Series: DT Output (kVA): 75 KiloVolt-Amps Primary Volts AC: 230 Volts AC Secondary Volts AC: 230 Volts AC Phase: 3 Motor HP: 60 Enclosure Rating: NEMA 1 Termination: Pads Winding: Aluminum Mounting: Floor; Wall Approvals: UL;CSA Circuit Diag. No.: ACME_DTRAN_59 Diag. No.: ACME_DTRAN_E Picture No.: ACME_DTRAN_WS-A-3 H x W x D: 29.9 in x 28.15 in x 22.37 in Net Weight: 525 lb Gross Weight: 525 lb
Power & Electrical Transformers Drive Isolation Transformers
更多产品:
更多品牌:
