MRC Bearings 7311DU 轴承-产品快照
- 品牌:
- MRC Bearings
- 型号:
- 7311DU
- 重量:
- 1.4528 kg
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,cs10@gchane.com , QQ1653501665 |
产品介绍
MRC Bearings 7311DU 轴承
MRC 7311DU ANGULAR CONTACT BALL BRGS
MRC Bearing
Item Details Manufacturer: MRC Bearing Service Weight: 3.2 lbs. Product Name: 7300-D Medium Series Duplex Ball Bearing Description: Single Row Angular Contact Bearing, 55 mm ID x 120 mm OD x 29 mm Wide, Open, Standard Precision (ABEC 1), Steel Cage, Normal Clearance (C0), 29° Contact Angle, Duplex (2) Set Specifications Inch/Metric Metric Bore Bore Type Round Bore I.D. 55 mm O.D. [Min] O.D. [Max] O.D. 120 mm Width [Min] Width [Max] Width 29 mm Enclosure Open Rows of Balls Single Material Steel O.D. Type Straight Bearing Type Angular Contact Precision Standard Radial Internal Clearance Specification Normal Clearance Ambient Temperature Range [Min] Ambient Temperature Range [Max] Ball Material Steel Cage Type Metal Capacity Standard Capacity Contact Angle 29° Guide Type Lubrication Outer Ring Width 29 mm Precision Level Standard (ABEC 1) Preload Level None Seal Material None Seal Type Unsealed Seal Width Dynamic Load Rating 19200 lbf Static Load Rating [Max] 13900 lbf Ball Dia. Bearing Design Bore B Cage Material Steel Collar No. Collar O.D. Collar Width Corner Radius [Min] Eccentric Collar Offset Fillet Radius 2 mm Flange O.D. [Max] Flange O.D. Flange Width [Max] Flange Width Flush Ground Housing Shoulder Diameter [Min] Housing Shoulder Diameter [Max] Housing Shoulder Diameter Industry Standard Part # Inner Ring O.D. Inner Ring Offset Inner Ring Width 29 mm Internal Design Universal Mounting Limiting Speed Limiting Speed - Grease 5100 rpm Limiting Speed - Oil 6600 rpm Limiting Speed - Sealed Locking Device No Locking Device Lube Hole Center Lubricant Oil Preservative Misalignment Range No. in Set Duplex Set No. of Balls O.D. (B) Outer Ring Outer Ring Inner Diameter Outer Ring Size Peak Running Torque (mg-mm) Peak Starting Torque (mg-mm) Pre Lubricant Preload Amount Radial Internal Clearance Normal Radial Load Rating [Max] Radial Rigidity (lbf/µm) Reference Speed Seal O.D. Seal Protection Width Seating Washer Series Set Screw Offset Set Screw Size Shaft Shoulder Diameter [Min] Shaft Tolerance Snap Ring No Snap Ring Snap Ring O.D. Snap Ring Offset Snap Ring Thickness Special Features Stamping Static Thrust Load Rating [Max] Temperature Range [Min] Temperature Range [Max] 450 °F Use With Product Information General 7000 Series bearings are single-row 29° angular contact bearings having one heavy race shoulder and one counterbored race shoulder on the outer ring. Because of this construction, it is possible to incorporate a greater number of balls than in the deep groove nonfilling notch bearing. the combination of maximum ball complement and the angular contact feature reduces the specific ball loading under thrust load, resulting in high thrust load carrying capacity. MRC 7000 Series angular contact bearings should be used in applications in which the thrust load is especially heavy and beyond the capacity of singlerow types; for example, for a vey heavy thrust load in one direction, or a heaby thrust load in one direction combined with a radial load. Cage Types and Materials: For normal usage: heavy stock, two-piece steel formed pockets, with turned-over fingers or riveted together. For severe vibration, very high speeds, or high operating temperatures: one-piece machined construction of suitable material (phenolic composition, bronze, or special material riding ground O.D. of inner ring). 7300 series bearings have the same ring and ball cage construction as the 7200 Series but are heavier sectioned bearings with a ball complement capable of handling heavier loads. 7300 Series are listed with bore sizes from 10 mm to 280 mm. For two-directional thrust loads, use duplex bearings. 7000 Series bearings are single-row 29° angular contact bearings having one heavy race shoulder and one counterbored race shoulder on the outer ring. Because of this construction, it is possible to incorporate a greater number of balls than in the deep groove nonfilling notch bearing. the combination of maximum ball complement and the angular contact feature reduces the specific ball loading under thrust load, resulting in high thrust load carrying capacity. MRC 7000 Series angular contact bearings should be used in applications in which the thrust load is especially heavy and beyond the capacity of singlerow types; for example, for a vey heavy thrust load in one direction, or a heaby thrust load in one direction combined with a radial load. Cage Types and Materials: For normal usage: heavy stock, two-piece steel formed pockets, with turned-over fingers or riveted together. For severe vibration, very high speeds, or high operating temperatures: one-piece machined construction of suitable material (phenolic composition, bronze, or special material riding ground O.D. of inner ring). 7300 series bearings have the same ring and ball cage construction as the 7200 Series but are heavier sectioned bearings with a ball complement capable of handling heavier loads. 7300 Series are listed with bore sizes from 10 mm to 280 mm. For two-directional thrust loads, use duplex bearings.
BRAND: MRC Bearing | MODEL: 7311DU | CONDITION: NEW | SKU: 1133412
Bearings