MRC Bearings 7316PDU-BRZ 轴承-产品快照

产品介绍

MRC Bearings 7316PDU-BRZ 轴承

MRC 7316PDU-BRZ ANGULAR CONTACT BALL BRGS

MRC Bearing

Item Details Manufacturer: MRC Bearing Service Weight: 8.8 lbs. Product Name: 7300-PD Medium Series Duplex Ball Bearing Description: Single Row Angular Contact Bearing, 80 mm ID x 170 mm OD x 78 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set Specifications Inch/Metric Metric Bore Bore Type Round Bore I.D. 80 mm O.D. [Min] O.D. [Max] O.D. 170 mm Width [Min] Width [Max] Width 78 mm Enclosure Open Rows of Balls Single Material Steel O.D. Type Straight Bearing Type Angular Contact Precision Standard Radial Internal Clearance Specification Normal Clearance Ambient Temperature Range [Min] Ambient Temperature Range [Max] Ball Material Steel Cage Type Metal Capacity Standard Capacity Contact Angle 40° Guide Type Lubrication Outer Ring Width 78 mm Precision Level Standard (ABEC 1) Preload Level None Seal Material None Seal Type Unsealed Seal Width Dynamic Load Rating 32100 lbf Static Load Rating [Max] 27000 lbf Ball Dia. Bearing Design Bore B Cage Material Brass/Bronze Collar No. Collar O.D. Collar Width Corner Radius [Min] Eccentric Collar Offset Fillet Radius 2 mm Flange O.D. [Max] Flange O.D. Flange Width [Max] Flange Width Flush Ground Housing Shoulder Diameter [Min] Housing Shoulder Diameter [Max] Housing Shoulder Diameter Industry Standard Part # Inner Ring O.D. Inner Ring Offset Inner Ring Width 78 mm Internal Design Universal Mounting Limiting Speed Limiting Speed - Grease 3600 rpm Limiting Speed - Oil 4700 rpm Limiting Speed - Sealed Locking Device No Locking Device Lube Hole Center Lubricant Oil Preservative Misalignment Range No. in Set Duplex Set No. of Balls O.D. (B) Outer Ring Outer Ring Inner Diameter Outer Ring Size Peak Running Torque (mg-mm) Peak Starting Torque (mg-mm) Pre Lubricant Preload Amount Radial Internal Clearance Normal Radial Load Rating [Max] Radial Rigidity (lbf/µm) Reference Speed Seal O.D. Seal Protection Width Seating Washer Series Set Screw Offset Set Screw Size Shaft Shoulder Diameter [Min] Shaft Tolerance Snap Ring No Snap Ring Snap Ring O.D. Snap Ring Offset Snap Ring Thickness Special Features Stamping Static Thrust Load Rating [Max] Temperature Range [Min] Temperature Range [Max] 450 °F Use With Product Information General MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity is required. This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant. Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring. 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant. MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity is required. This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant. Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring. 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.

BRAND: MRC Bearing | MODEL: 7316PDU-BRZ | CONDITION: NEW | SKU: 1133439

Bearings