MRC Bearings 1903S 轴承-产品快照
- 品牌:
- MRC Bearings
- 型号:
- 1903S
- 重量:
- 0.01362 kg
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，as10@gchane.com , QQ3350168184
|
产品介绍
MRC Bearings 1903S 轴承
MRC 1903S THIN SECTION BALL BRGS
MRC Bearing
Item Details Manufacturer: MRC Bearing Service Weight: 0.031 lbs. Product Name: 1900-S Extremely Light Series Ball Bearing Description: 17 mm ID x 30 mm OD x 7 mm Wide; Open; No Snap Ring; Single Row Radial Steel Bearing Specifications Inch/Metric Metric Bore Bore Type Round Bore I.D. 17 mm O.D. [Min] O.D. [Max] O.D. 30 mm Width [Min] Width [Max] Width 7 mm Enclosure Open Rows of Balls Single Material Steel O.D. Type Straight Bearing Type Radial Precision Standard Radial Internal Clearance Specification Normal Clearance Ambient Temperature Range [Min] Ambient Temperature Range [Max] Ball Material Steel Cage Type Metal Capacity Standard Capacity Contact Angle 0° Guide Type Lubrication Outer Ring Width 7 mm Precision Level Standard (ABEC 1) Preload Level None Seal Material None Seal Type Unsealed Seal Width Dynamic Load Rating 980 lbf Static Load Rating [Max] 522 lbf Ball Dia. Bearing Design Bore B Cage Material Steel Collar No. Collar O.D. Collar Width Corner Radius [Min] Eccentric Collar Offset Fillet Radius 0.3 mm Flange O.D. [Max] Flange O.D. Flange Width [Max] Flange Width Flush Ground Housing Shoulder Diameter [Min] Housing Shoulder Diameter [Max] Housing Shoulder Diameter Industry Standard Part # Inner Ring O.D. Inner Ring Offset Inner Ring Width 7 mm Internal Design Limiting Speed Limiting Speed - Grease 22000 rpm Limiting Speed - Oil 28000 rpm Limiting Speed - Sealed 14000 rpm Locking Device No Locking Device Lube Hole Center Lubricant Oil Preservative Misalignment Range No. in Set Single Bearing No. of Balls O.D. (B) Outer Ring Outer Ring Inner Diameter Outer Ring Size Peak Running Torque (mg-mm) Peak Starting Torque (mg-mm) Pre Lubricant None Preload Amount Radial Internal Clearance Normal Radial Load Rating [Max] Radial Rigidity (lbf/µm) Reference Speed Seal O.D. Seal Protection Width Seating Washer Series Set Screw Offset Set Screw Size Shaft Shoulder Diameter [Min] Shaft Tolerance Snap Ring No Snap Ring Snap Ring O.D. Snap Ring Offset Snap Ring Thickness Special Features Stamping Static Thrust Load Rating [Max] Temperature Range [Min] Temperature Range [Max] 450 °F Use With Product Information Applications Designed for applications where a lack of space or limitations on weight require a bearing with a thinner section Features Can carry significant radial loads Can carry substantial thrust loads in either direction, even at very high speeds Supplied with a pressed steel cage Single-row radial conrad-type bearings that can accommodate light radial loads, two-directional thrust loads, or a combination of both Designed for applications where a lack of space or limitations on weight require a bearing with a thinner section
BRAND: MRC Bearing | MODEL: 1903S | CONDITION: NEW | SKU: 1131957
Bearings
更多产品:
更多品牌:
