MRC Bearings 411S 轴承-产品快照
- 品牌:
- MRC Bearings
- 型号:
- 411S
- 重量:
- 2.31086 kg
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，cs11@gchane.com , QQ1429311537
|
产品介绍
MRC Bearings 411S 轴承
MRC 411S SINGLE ROW BALL BRGS
MRC Bearing
Item Details Manufacturer: MRC Bearing Service Weight: 5.09 lbs. Product Name: 400-S Heavy Series Ball Bearing Description: 55 mm ID x 140 mm OD x 33 mm Wide; Open; No Snap Ring; Single Row Radial Steel Bearing Specifications Inch/Metric Metric Bore Bore Type Round Bore I.D. 55 mm O.D. [Min] O.D. [Max] O.D. 140 mm Width [Min] Width [Max] Width 33 mm Enclosure Open Rows of Balls Single Material Steel O.D. Type Straight Bearing Type Radial Precision Standard Radial Internal Clearance Specification Normal Clearance Ambient Temperature Range [Min] Ambient Temperature Range [Max] Ball Material Steel Cage Type Metal Capacity Standard Capacity Contact Angle 0° Guide Type Lubrication Outer Ring Width 33 mm Precision Level Standard (ABEC 1) Preload Level None Seal Material None Seal Type Unsealed Seal Width Dynamic Load Rating 22400 lbf Static Load Rating [Max] 13900 lbf Ball Dia. Bearing Design Bore B Cage Material Steel Collar No. Collar O.D. Collar Width Corner Radius [Min] Eccentric Collar Offset Fillet Radius 2 mm Flange O.D. [Max] Flange O.D. Flange Width [Max] Flange Width Flush Ground Housing Shoulder Diameter [Min] Housing Shoulder Diameter [Max] Housing Shoulder Diameter Industry Standard Part # Inner Ring O.D. Inner Ring Offset Inner Ring Width 33 mm Internal Design Limiting Speed Limiting Speed - Grease 5000 rpm Limiting Speed - Oil 6000 rpm Limiting Speed - Sealed 3400 rpm Locking Device No Locking Device Lube Hole Center Lubricant Oil Preservative Misalignment Range No. in Set Single Bearing No. of Balls O.D. (B) Outer Ring Outer Ring Inner Diameter Outer Ring Size Peak Running Torque (mg-mm) Peak Starting Torque (mg-mm) Pre Lubricant Preload Amount Radial Internal Clearance Normal Radial Load Rating [Max] Radial Rigidity (lbf/µm) Reference Speed Seal O.D. Seal Protection Width Seating Washer Series Set Screw Offset Set Screw Size Shaft Shoulder Diameter [Min] Shaft Tolerance Snap Ring No Snap Ring Snap Ring O.D. Snap Ring Offset Snap Ring Thickness Special Features Stamping Static Thrust Load Rating [Max] Temperature Range [Min] Temperature Range [Max] 450 °F Use With Product Information General Single-row radial deep groove bearing with no filling notches Can carry significant radial loads Can carry substantial thrust loads in either direction, even at very high speeds Supplied with a pressed steel cage This series is made up of single-row radial conrad -type bearings made with bores ranging from 17 mm to 110 mm. They are used in applications with very heavy radial loads, two-directional thrust loads, or a combination of both. Applications Used with heavy radial loads, two-directional thrust loads or a combination of both Features Single-row radial deep groove bearing with no filling notches Can carry significant radial loads Can carry substantial thrust loads in either direction, even at very high speeds Supplied with a pressed steel cage Bearings available from 17 mm to 110 mm Single-row radial deep groove bearing with no filling notches Can carry significant radial loads Can carry substantial thrust loads in either direction, even at very high speeds Supplied with a pressed steel cage This series is made up of single-row radial conrad -type bearings made with bores ranging from 17 mm to 110 mm. They are used in applications with very heavy radial loads, two-directional thrust loads, or a combination of both. Used with heavy radial loads, two-directional thrust loads or a combination of both
BRAND: MRC Bearing | MODEL: 411S | CONDITION: NEW | SKU: 1132812
Bearings
更多产品:
更多品牌:
