MRC Bearings 307MG 轴承-产品快照
- 品牌:
- MRC Bearings
- 型号:
- 307MG
- 重量:
- 0.46762 kg
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，cs10@gchane.com , QQ1653501665
|
产品介绍
MRC Bearings 307MG 轴承
MRC 307MG MAX TYPE BALL BRGS
MRC Bearing
Item Details Manufacturer: MRC Bearing Service Weight: 1.034 lbs. Product Name: 300-M Medium Series Ball Bearing Description: 35 mm ID x 80 mm OD x 21 mm Wide; Open; With Snap Ring; Single Row Radial Steel Bearing Specifications Inch/Metric Metric Bore Bore Type Round Bore I.D. 35 mm O.D. [Min] O.D. [Max] O.D. 80 mm Width [Min] Width [Max] Width 21 mm Enclosure Open Rows of Balls Single Material Steel O.D. Type Straight w/ Snap Ring Bearing Type Radial Precision Standard Radial Internal Clearance Specification Normal Clearance Ambient Temperature Range [Min] Ambient Temperature Range [Max] Ball Material Steel Cage Type Metal Capacity Maximum Capacity Contact Angle 0° Guide Type Lubrication Outer Ring Width 21 mm Precision Level Standard (ABEC 1) Preload Level None Seal Material None Seal Type Unsealed Seal Width Dynamic Load Rating 8830 lbf Static Load Rating [Max] 6410 lbf Ball Dia. Bearing Design Bore B Cage Material Steel Collar No. Collar O.D. Collar Width Corner Radius [Min] Eccentric Collar Offset Fillet Radius 1 1/2 mm Flange O.D. [Max] Flange O.D. Flange Width [Max] Flange Width Flush Ground Housing Shoulder Diameter [Min] Housing Shoulder Diameter [Max] Housing Shoulder Diameter Industry Standard Part # Inner Ring O.D. Inner Ring Offset Inner Ring Width 21 mm Internal Design Limiting Speed Limiting Speed - Grease 7000 rpm Limiting Speed - Oil 8500 rpm Limiting Speed - Sealed Locking Device No Locking Device Lube Hole Center Lubricant Oil Preservative Misalignment Range No. in Set Single Bearing No. of Balls O.D. (B) Outer Ring Outer Ring Inner Diameter Outer Ring Size Peak Running Torque (mg-mm) Peak Starting Torque (mg-mm) Pre Lubricant None Preload Amount Radial Internal Clearance Normal Radial Load Rating [Max] Radial Rigidity (lbf/µm) Reference Speed Seal O.D. Seal Protection Width Seating Washer Series Set Screw Offset Set Screw Size Shaft Shoulder Diameter [Min] Shaft Tolerance Snap Ring With Snap Ring Snap Ring O.D. Snap Ring Offset Snap Ring Thickness Special Features Stamping Static Thrust Load Rating [Max] Temperature Range [Min] Temperature Range [Max] 450 °F Use With Product Information Caution Not to be used where only thrust loads are present Applications Used with very heavy radial loads, or a combination of radial and thrust loads where the radial load is predominant Features Consists of single-row maximum capacity filling-notch bearings with bores ranging from 17 mm to 110 mm Maximum radial load-carrying capacity Ability to carry heavy combined radial and thrust loads Designated as the notched type because it has a filling notch on one side of the inner and outer rings Normally furnished with ABMA CO radial clearance Type and material available is a two-piece, pressed steel, ball riding, stayrod cage Not to be used where only thrust loads are present Used with very heavy radial loads, or a combination of radial and thrust loads where the radial load is predominant
BRAND: MRC Bearing | MODEL: 307MG | CONDITION: NEW | SKU: 1132501
Bearings
更多产品:
更多品牌:
