Char-Lynn (Eaton) 101-2549-009-产品快照
- 品牌:
- Char-lynn
- 型号:
- Char-Lynn (Eaton) 101-2549-009
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
伊顿(中国)投资有限公司 | 021-52000099 |
产品介绍
Char-Lynn (Eaton) 101-2549-009
Char-Lynn (Eaton) 101-2549-009
Char-Lynn (Eaton) 101-2549-009
101-2549-009
Product Features & Specifications ACTUAL CASE DRAIN: No Case Drain ACTUAL MOUNTING FLANGE: 4 Bolt Std: 44.4 .75 Dia. X 3.0 12 Pilot, .375-16 Mounting Holes On 82.6 .25 Dia. B.C. ACTUAL OUTPUT SHAFT: 22.22 875 Dia. Straight With Square Key (Sae B) ACTUAL PORT TYPE: .500-14 Nptf Dryseal Pipe thread Accepts Dryseal Fittings Per Sae J476A Additional Detail: To Assure Best Motor Life, Run Motor For Approximately One Hour At 30 Percent Of Rated Pressure Before Application To Full Load. Be Sure Motor Is Filled With Fluid Prior To Any Load Applications. Case Drain: No Case Drain DESIGN CODE: Nine - 009 Electronic Catalog: Click here ELECTRONIC PARTS DRAWING: Click here ELECTRONIC REPAIR MANUAL: Click here FLOW (GPM): Continuous: 15 gpm / Intermittent: 20 gpm Geometric Displacement (cu-iIn./rev): 22.60 Inlet And Outlet Ports Size: 1/2"-14 NPTF Ports Size 8MP Manufacturer Series: H Series MANUFACTURER'S ACTUAL DISPLACEMENT: 370 Cm3/R, 22.6 In3/R MINIMUM STARTING TORQUE (LB-IN.): Continuous: 2,920 Lb-In. / Intermittent: 3,610 Lb-In. Operation Rating Description: Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every Minute / Peak Operation - 1 Percent Of Every Minute Output Shaft Size: 7/8" Straight With Square Key - SAE B PACKAGE QUANTITY: 1 Each PAINT / SPECIAL PACKAGING: Painted Low Gloss Black PAPER CATALOG: 11-885 PRESSURE (PSI): Continuous: 1,250 psi / Intermittent 1,500 psi RECOMMENDED FILTRATION: Per Iso Cleanliness Code. Level 18/13 RECOMMENDED FLUIDS: Premium Quality, Anti-Wear Type Hydraulic Oil With A Viscosity Of Not Less Than 701 Sus Or 13Cst With Best Range Of 100 - 200 Sus Or 20 - 43 Cst At Operating Temperature, RECOMMENDED MAXIMUM SYSTEM OPERATING TEMPERATURE: 82C Or 180F REPAIR MANUAL: 7-117 REPAIR PARTS DRAWING: 6-121 REPLACEMENT BEARING, THRUST NEEDLE - SOLD SEPARATELY: 009, 008 & 007 Design - 7537-000 - 1 Required Replacement Buna Seal Kit - Sold Separately: 009 & 008 Design - 60540-000; 007 Design - 60023-000 - 1 Required Replacement Drive - Sold Separately: 009 Design - 22191-000 - 1 Required REPLACEMENT GEROTOR - SOLD SEPARATELY: 009 Design - 8277-027 - 1 Required REPLACEMENT LONG CAP SCREW (CAP END) - SOLD SEPARATELY: 009 Design - 16294-325 - 7 Required Replacement Mounting Flange - Sold Separately: 009 & 008 Design 22000-002, 007 Design 7464-000 - 1 Required Replacement Output Shaft - Sold Separately: 009, 008 & 007 Design - 7360-017 - 1 Required REPLACEMENT PLATE, SPACER - SOLD SEPARATELY: 009, 008 & 007 Design - 7358-000 - 1 Required REPLACEMENT RACE, THRUST BEARING - SOLD SEPARATELY: 009, 008 & 007 Design - 7462-000 - 1 Required Replacement Rear Housing - Sold Separately: 009 Design - 22230-002, 008 & 007 Design - 7359-002 - 1 Required Replacement Short Cap Screw (Mounting End) - Sold Separately: 009, 008 & 007 Design - 16292-088 - 4 Required Replacement Viton Seal Kit - Sold Separately: 009 & 008 Design - 60544-000; 007 Design - 60032-000 - 1 Required SEALS: Standard Seals Series: H Series Gerotor Motor SPECIAL FEATURES: Free Running Gerotor SPECIAL FEATURES - ASSEMBLY: None SPECIAL FEATURES - HARDWARE: Free Running Gerotor SPEED (RPM): Continuous: 152 rpm TORQUE (LB-IN.): Continuous: 3,604 Lb-In. / Intermittent: 4,283 Lb-In. Type Of Mount: 4 Bolt - 1-3/4" Pilot Dia. With 3/8"-16 UNC-2B Mtg Holes Weight Ea.: 14.7 Lbs
101-2549-009