Red Lion 红狮 TCU00002 自动化与控制温度控制与过程加热温度控制器PID温度控制器-产品快照
- 品牌:
- Red Lion 红狮
- 型号:
- TCU00002
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,cs11@gchane.com , QQ1429311537 |
产品介绍
Red Lion 红狮 TCU00002 自动化与控制温度控制与过程加热温度控制器PID温度控制器
Red Lion Controls TCU00002
Red Lion 红狮
Control Unit, Temperature; 1 A @ 35 degC (Max.); 120/240 VAC; 10 VA; 0 to deg Overview The TCU Controller accepts signals from a variety of temperature sensors (thermocouple or RTD elements), precisely displays the process temperature, and provides an accurate output control signal (time proportional or linear) to maintain a process at the desired control point. A comprehensive set of easy to use steps allows the controller to solve various application requirements. The controller can operate in the PID control mode for both heating and cooling, with on-demand auto-tune, which will establish the tuning constants. The PID tuning constants may be fine-tuned by the operator at any time and then locked out from further modification. The controller employs a unique overshoot suppression feature, which allows the quickest response without excessive overshoot. The unit can be transferred to operate in the manual mode, providing the operator with direct control of the output. The controller may also be programmed to operate in the ON/OFF control mode with adjustable hysteresis. Dual 4-digit displays allow viewing of the process temperature and setpoint simultaneously. Front panel indicators inform the operator of the controller and output status. Replaceable and interchangeable output modules (relay, SSR drive, or triac) can be installed for the main control output, alarm output(s) and cooling output. Optional dual alarms can be configured to activate according to a variety of actions (Absolute HI or LO, Deviation HI or LO, Band IN or OUT, Heater Break and Valve Fail Detect) with adjustable hysteresis. A standby feature suppresses the output during power-up until the temperature stabilizes outside the alarm region. An optional secondary output is available (for processes that require cooling) which provides increased control accuracy and response.
Brand/Series : TCU Series Contact Form : SPST Current, Load : 1 A @ 35 °C (Max.) Dimensions : 49.5mm W x 96.5mm H x 144.6mm D Display Colors : Green, Red Display Type : Multi Line Enclosure Rating : IP65 Height : 3.8" (96.5mm) Input Type : RTD, Thermocouple IP Rating : IP65 Length : 1.95" (49.53mm) Mounting Type : Panel Mount Number of Inputs : 1 Number of Outputs : 2 Output Type : Logic, Relay, SSR, Triac Power Factor : 10 VA Power Rating : 10 VA Primary Type : Controller Size : 49.5 x 96.5 mm Special Features : Field Replaceable and Interchangeable Output Modules, Self-Diagnostics, Full PID Control with Reduced Overshoot Standards : cURus, CE Supply Voltage : 115/230 VAC Temperature, Ambient : 0 to +50 °C Temperature, Operating : 0 to +50 °C Temperature, Operating, Maximum : 50°C Temperature, Operating, Minimum : 0°C Temperature, Operating, Range : 0 to 50°C Termination : Screw Type : Temperature Voltage Rating : 120/240 VAC
Automation & Control Temperature Control & Process Heating Temperature Controllers PID Temperature Controllers