opto22奥普图 SNAP-OMR6T-C-产品快照
- 品牌:
- opto22奥普图
- 型号:
- SNAP-OMR6T-C
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
深圳市格雷创科技有限公司 | 400-811-6961 | 微信及邮件咨询,官网:www.gchane.com |
产品介绍
opto22奥普图 SNAP-OMR6T-C
opto22/奥普图 SNAP-OMR6T-C
opto22奥普图
SNAP Isolated 4-channel Mechanical Power Relay Output Module, Form C, with Integrated Transient Suppression ; The SNAP-OMR6T-C mechanical power relay output module offers four channels of switching for up to 250 VAC or 30 VDC, 6 amp loads. Each of the four mechanical contacts can be used as normally open or normally closed. This module includes integrated transient suppression while maintaining minimal leakage current. Mechanical power relay output modules handle more current than any other SNAP output module and provide channel-to-channel isolation. Fusing is not provided; you must provide fusing when wiring the module. Each contact on the SNAP-OMR6T-C can carry 6 amps. Having more than one channel on at the same time does not reduce the amount of power each channel can carry. Because channels are not polarity sensitive, each channel can switch either AC or DC power, thus potentially reducing the number of modules needed. In solid-state SNAP AC output modules, possible leakage current might cause a load to stick ON. In contrast, these modules dramatically reduce that possibility. Leakage current for the SNAP-OMR6T-C is less than 1 microamp. Part of the SNAP PAC System, the SNAP-OMR6T-C mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller . Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley PLC system. The SNAP-OMR6T-C is compatible with all SNAP PAC brains and rack-mounted controllers, including both standard wired models and Wired+Wireless™ models. It is also compatible with SNAP Ultimate, SNAP Ethernet, and SNAP Simple brains, as well as other SNAP brains such as the serial B3000 and the B3000-B. It can be used on both B-series and M-series mounting racks. A similar module without transient suppression is available: the SNAP-OMR6-C . However, the SNAP-OMR6T-C is recommended for most applications, including applications with long wire runs. NOTE: The SNAP-OMR6T-C is a drop-in replacement for the older SNAP-OMR6-A, which is obsolete. NOTE: For very high inductive loads, additional transient protection is recommended.
SNAP-OMR6-C SNAP-OMR6T-C Field Side Ratings (each channel) Contact Configuration Form C (SPDT, normally open or closed) Form C (SPDT, normally open or closed) Line Voltage - Range 0–250 VAC or 5–30 VDC 0–250 VAC or 5–30 VDC Current Rating 6 amps switching @ 250 VAC / 30 VDC 6 amps switching @ 250 VAC / 30 VDC Surge Current 6 amps 6 amps Minimum Load 5 VDC, 10 mA 5 VDC, 10 mA Contact Resistance ≤ 100 milliohms ≤ 100 milliohms Leakage Current none < 1 microamp @ 250 VAC Clamping Voltage (for transient suppression) External transient suppression required 440 V nominal Duty Cycle -- Not applicable -- 1 Hz Switching Power 1500 VA / 144 W (DC) 1500 VA / 144 W (DC) Peak Blocking Voltage 250 VAC @ 360 V pk 250 VAC @ 360 V pk Channel-to-channel isolation 300 VAC (1500 Vtransient) 300 VAC (1500 Vtransient) Logic Side Ratings Pickup Voltage 1 V @ 2 mA 1 V @ 2 mA Dropout Voltage 4 VDC 4 VDC Control Resistance 220 ohms 220 ohms Logic Supply Voltage 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC Logic Supply Current 160 mA maximum 160 mA maximum Module Ratings Number of Channels Per Module 4 4 Turn-on Time 8 milliseconds 8 milliseconds Turn-off Time 8 milliseconds 8 milliseconds Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws Single gray connector: 5.26 in-lb (0.6 N-m) Black connectors: 1.7 in-lb (0.2 N-m) 5.26 in-lb (0.6 N-m) Temperature -20 to 70 °C, operating -30 to 85 °C, storage -20 to 70 °C, operating -30 to 85 °C, storage Agency Approvals UL, CE, RoHS, DFARS UL, CE RoHS, DFARS Mechanical Life 10 x 10 6 operations 10 x 10 6 operations Operational Life 30 x 10 3 operations 30 x 10 3 operations Warranty 30 months 30 months
Opto 22 Home Products All Products Product Selector I/O Digital I/O SNAP I/O Mechanical relays