opto22奥普图 SNAP-OMR6-A-产品快照
- 品牌:
- opto22奥普图
- 型号:
- SNAP-OMR6-A
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
深圳市格雷创科技有限公司 | 400-811-6961 | 微信及邮件咨询,官网:www.gchane.com |
产品介绍
opto22奥普图 SNAP-OMR6-A
opto22/奥普图 SNAP-OMR6-A
opto22奥普图
OBSOLETE SNAP Isolated 4-Channel Mechanical Power Relay Output Module, Form A ; The SNAP-OMR6-A is obsolete and no longer available. It has been replaced by the SNAP-OMR6-C , which is a Form C mechanical relay. It is a pin-compatible, drop-in replacement and offers the option to wire each of the four mechanical contacts as normally open or normally closed. You may also want to consider the SNAP-OMR6T-C , which includes integrated transient suppression. ----------- The SNAP-OMR6-A mechanical power relay output module offers four channels of switching for up to 250 VAC or 30 VDC, 6 amp loads. All four mechanical contacts are normally open. Mechanical power relay output modules handle more current than any other SNAP output module and provide channel-to-channel isolation. Fusing is not provided; you must provide fusing when wiring the module. Each contact on the SNAP-OMR6-A can carry 6 amps. Having more than one channel on at the same time does not reduce the amount of power each channel can carry. Because channels are not polarity sensitive, each channel can switch either AC or DC power, thus potentially reducing the number of modules needed. In solid-state SNAP AC output modules, possible leakage current might cause an electronic input to stick in the ON state. In contrast, a channel on these mechanical power relay modules presents a true open circuit when it is off, and the modules can be used exactly as solid-state AC modules are used. Part of the SNAP PAC System, the SNAP-OMR6-A mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley PLC system. The SNAP-OMR6-A is compatible with all SNAP PAC brains and rack-mounted controllers, including both standard wired models and Wired+Wireless™ models. It is also compatible with SNAP Ultimate, SNAP Ethernet, and SNAP Simple brains, as well as other SNAP brains such as the serial B3000 and the B3000-B. It can also be used on B-series and M-series mounting racks.
SNAP-OMR6-A [Obsolete] Field Side Ratings (each channel) Contact Configuration Form A (SPST, normally open) Line Voltage - Range 0–250 VAC or 0–30 VDC Current Rating 6 amps switching @ 250 VAC / 30 VDC Surge Current 6 amps Minimum Load 5 VDC, 10 mA Contact Resistance ≤ 100 milliohms Switching Power 1500 VA / 144 W (DC) Peak Blocking Voltage 250 VAC / 30 VDC Channel-to-channel isolation 300 VAC (1500 Vtransient) Logic Side Ratings Pickup Voltage 1 V @ 2 mA Dropout Voltage 4 VDC Control Resistance 220 ohms Logic Supply Voltage 5 VDC ± 0.25 VDC Logic Supply Current 160 mA maximum Module Ratings Number of Channels Per Module 4 Turn-on Time 8 milliseconds Turn-off Time 8 milliseconds Torque, hold-down screws 4 in-lb (0.45 N-m) Torque, connector screws Single gray connector: 5.26 in-lb (0.6 N-m) Black connectors: 1.7 in-lb (0.2 N-m) Temperature -20 to 70 °C, operating -30 to 85 °C, storage Agency Approvals CE, RoHS, DFARS Mechanical Life 10 x 10 6 operations Operational Life 30 x 10 3 operations Warranty 30 months
Opto 22 Home Products SNAP PAC System Product Selector I/O Digital I/O SNAP I/O Mechanical relays