opto22奥普图 SNAP-OAC5-IFM-产品快照
- 品牌:
- opto22奥普图
- 型号:
- SNAP-OAC5-IFM
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 深圳市格雷创科技有限公司 | 400-811-6961 | 微信及邮件咨询,官网：www.gchane.com |
产品介绍
opto22奥普图 SNAP-OAC5-IFM
opto22/奥普图 SNAP-OAC5-IFM
opto22奥普图
SNAP 4-Ch Isolated 12-250 VAC Digital (Discrete) Output Module, FM Approved ; The SNAP-OAC5-iFM provides four isolated channels of 12-250 VAC digital output, each switching a separate AC load. AC outputs use zero voltage turn on and zero current turn off for transient-free switching. The module features channel-specific LEDs for troubleshooting. This module is Factory Mutual approved. Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller . Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley MicroLogix or other RSLogix-based PLC system , such as ControlLogix or CompactLogix. For easier, faster wiring, see SNAP TEX cables and breakout boards . Build your system in the SNAP I/O Configurator .
SNAP-OAC5-FM SNAP-OAC5-i-FM Key Feature Factory Mutual approved Four isolated channels Factory Mutual approved Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) Field Side Ratings (each channel) Line Voltage - Range 12–250 VAC 12–250 VAC Line Voltage - Nominal 120/240 VAC 120/240 VAC Current Rating 0 °C to 70 °C Ambient 3 amps per module 3 amps per module One Cycle Surge 80 amps peak (50/60 Hz) 80 amps peak (50/60 Hz) Minimum Load Current 20 mA 20 mA Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps Off-state Leakage at Nominal Voltage - 60 Hz 2.5 mA @ 240 VAC 1.25 mA @ 120 VAC 2.5 mA @ 240 VAC 1.25 mA @ 120 VAC Peak Blocking Voltage 500 V 500 V Operating Frequency 25–65 Hz 25–65 Hz dV/ dt - Off-state 200 volts/msec 200 volts/msec dV/ dt - Commutating Snubbed for rated 0.5 power factor load Snubbed for rated 0.5 power factor load Fuse (Common to all Channels) 250 VAC - 4A 5x20 mm Fast-acting Bell Fuse Part No. BEL 5HF4 Opto 22 Part No. SNAP-FUSE4AB Has four isolated channels. User must provide own fusing. Channel-to-channel isolation Not applicable 300 VAC (1500 V transient) Logic Side Ratings Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA Dropout Voltage 1 VDC 1 VDC Control Resistance 220 ohms 220 ohms Logic Supply Voltage 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum Module Ratings Channels Per Module 4 4 Turn-on Time 0.5 cycle maximum (zero volts crossover) 0.5 cycle maximum (zero volts crossover) Turn-off Time 0.5 cycle maximum (zero current crossover) 0.5 cycle maximum (zero current crossover) Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) Temperature -20 ° to 70 °C, operating -40 ° to 85 °C, storage -20 ° to 70 °C, operating -40 ° to 85 °C, storage Wire size range 22 to 14 AWG 22 to 14 AWG Agency Approvals CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS Warranty Lifetime Lifetime
Opto 22 Home Products IO4AB Product Selector I/O Digital I/O SNAP I/O AC Output
更多产品:
更多品牌:
