opto22奥普图 SNAP-TEX-MR10-16C-产品快照
- 品牌:
- opto22奥普图
- 型号:
- SNAP-TEX-MR10-16C
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 深圳市格雷创科技有限公司 | 400-811-6961 | 微信及邮件咨询,官网：www.gchane.com |
产品介绍
opto22奥普图 SNAP-TEX-MR10-16C
opto22/奥普图 SNAP-TEX-MR10-16C
opto22奥普图
16-Point Breakout Board with Mechanical Relays and Header Connector, for High-Density Digital Output Modules ; The SNAP-TEX-MR10-16C breakout board is designed for high-current switching of outputs through SNAP high-density digital (HDD) output modules. The board includes 16 mechanical relays, one for each point, that can switch up to 10 A per point. (Without the breakout board, SNAP HDD output modules can switch a maximum of 0.75 A per point.) The SNAP-TEX-MR10-16C includes on/off indicators for each point, and each point can be wired for normally closed or normally open. The board requires 24 VDC power. A header connector allows two MR10-16C breakout boards to connect to one SNAP-ODC-32-SRC 32-point digital output module using a SNAP-HD-G4F6 cable. The advantage of using this breakout board and cable with the module is that you do not have to wire them; simply snap the cable onto the top of the module and then plug the other two cable ends into the header connectors on the two boards. NOTE: A replacement relay, the SNAP-MR10 , is available. Build your system in the SNAP I/O Configurator .
Feature SNAP-TEX-MR10-16C Use with I/O modules SNAP-ODC5-i, SNAP-ODC5A-i, SNAP-ODC5SRC, SNAP-ODC-32-SRC Use with cables • For one high-density SNAP-ODC-32-SRC module, use a SNAP-HD-G4F6 cable to connect two breakout boards to one module. • For four 4-point modules, use SNAP-TEX-CBO6 (odd pins bussed) or SNAP-TEX-CBS6 (no bussing), depending on module. Use with jumper straps STRAP2Q, STRAP4Q Relay contacts SPDT (1 Form C) Typical life expectancy (Electrical): 1 x 10 5 Switching capacity 10 A @ 250 VAC Switch On time 7 ms nominal Switch Off time 3 ms nominal Fusing 24 V fuse for board. Opto 22 p/n SNAP-FUSE1AC Indicators 16 On/Off status indicators (one for each channel) 1 fuse-blown indicator Power requirements (all positions On) 24 VDC @ 300 mA Agency Approvals UL, CE, RoHS, DFARS Warranty 30 months from date of manufacture
Opto 22 Home Products SNAP PAC System Product Selector Accessories Breakout Boards SNAP TEX Mechanical relays
更多产品:
更多品牌:
