BECKHOFF倍福 BKH-BC5150 I / O系统现场总线控制器-产品快照
- 品牌:
- BECKHOFF倍福
- 型号:
- BKH-BC5150
- 重量:
- 0.1 kg
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
毕孚自动化设备贸易(上海)有限公司 | 4008207388 | |
广州永邦机电科技有限公司 | 020-38480341 | |
厦门鹭腾兴电气有限公司 | 0592-5507926 | |
上海欧沁机电工程技术有限公司 | 021-52910098 | |
深圳市丰德锐科技有限公司 | 0755-82526060 |
产品介绍
BECKHOFF倍福 BKH-BC5150 I / O系统现场总线控制器
BC5150 Compact Bus terminal Controller 48-KB CANopen
BECKHOFF倍福
Beckhoff BC5150 Bus Terminal Bus Terminal Controller Compact Bus Terminal Controller with integrated IEC 61131-3 PLC, Program memory: 48KB, Data memory: 32KB, Remanent data: 2KB, CANopen interface, 1Mbaud General Description The Bus Terminal Controllers are Bus Couplers with integrated PLC functionality. The Compact BC5150 Bus Terminal Controller for CANopen extends the Beckhoff small controller series by a cost-optimised version in a compact housing. The CANopen controller offers automatic baud rate detection up to 1 Mbaud and two address selection switches for address assignment. The Bus Terminal Controller is programmed using the TwinCAT programming system according to IEC 61131-3. The configuration/programming interface on the BC5150 is used to load the PLC program. If the software PLC TwinCAT is in use, the PLC program can also be loaded via the fieldbus. The inputs and outputs of the connected Bus Terminals are assigned in the default setting of the PLC. Each Bus Terminal can be configured in such a way that it exchanges data directly through the fieldbus with the higher-level automation device. Similarly, pre-processed data can be exchanged between the Bus Terminal Controller and the higher-level controller via the fieldbus. Controller for distributed signal processing The programming system TwinCAT for the BC5150 operates, independently of the manufacturer, in accordance with IEC 61131-3. The PLC programs can be written in five different programming languages (IL, FBD, LD, SFC, ST). In addition, TwinCAT offers extensive debug functionalities (breakpoint, single step, monitoring), which facilitate commissioning. It is also possible to perform adjustment and measurement of the cycle time.
I/O Systems Fieldbus Controller