BECKHOFF倍福 BKH-BC3150 I / O系统现场总线控制器-产品快照
- 品牌:
- BECKHOFF倍福
- 型号:
- BKH-BC3150
- 重量:
- 0.1 kg
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 毕孚自动化设备贸易（上海）有限公司 | 4008207388 | |
| 广州永邦机电科技有限公司 | 020-38480341 | |
| 厦门鹭腾兴电气有限公司 | 0592-5507926 | |
| 上海欧沁机电工程技术有限公司 | 021-52910098 | |
| 深圳市丰德锐科技有限公司 | 0755-82526060 |
产品介绍
BECKHOFF倍福 BKH-BC3150 I / O系统现场总线控制器
BC3150 Compact Bus terminal Controller 48-KB PROFIBUS
BECKHOFF倍福
Beckhoff BC3150 Bus Terminal Bus Terminal Controller Compact Bus Terminal Controller with integrated IEC 61131-3 PLC, Program memory: 48KB, Data memory: 32KB, Remanent data: 2KB, PROFIBUS interface, 12Mbaud General Description The Bus Terminal Controllers BC3100 and BC3150 are Bus Couplers with integrated PLC functionality and have a fieldbus interface for PROFIBUS. They are intelligent slaves and can be used as distributed intelligence in the PROFIBUS system. In the BC3100 Bus Terminal Controller, one unit consists of the controller, between 1 and 64 terminals, and a bus end terminal. The Compact BC3150 Bus Terminal Controller is housed in a cost-optimised and compact housing. Unlike the BC3100, the BC3150 supports up to 255 Bus Terminals via the K-bus extension. Both PROFIBUS controllers offer automatic baud rate detection up to 12 Mbaud and two address selection switches for address assignment. The Bus Terminal Controller is programmed using the TwinCAT programming system according to IEC 61131-3. The configuration/programming interface of the BC31xx is used to load the PLC program. If the software PLC TwinCAT is in use, the PLC program can also be loaded via the fieldbus. The inputs and outputs of the connected Bus Terminals are assigned in the default setting of the PLC. Each Bus Terminal can be configured in such a way that it exchanges data directly through the fieldbus with the higher-level automation device. Similarly, pre-processed data can be exchanged between the Bus Terminal Controller and the higher-level controller via the fieldbus. Controller for distributed signal processing The programming system TwinCAT for the BC3100 and BC3150 operates, independently of the manufacturer, in accordance with IEC 61131-3. The PLC programs can be written in five different programming languages (IL, FBD, LD, SFC, ST). In addition, TwinCAT offers extensive debug functionalities (breakpoint, single step, monitoring), which facilitate commissioning. It is also possible to perform adjustment and measurement of the cycle time.
I/O Systems Fieldbus Controller
更多产品:
更多品牌:
