Banner邦纳 SC26-2D 机器安全安全控制器和模块SC26系列安全控制器-产品快照
- 品牌:
- Banner邦纳
- 型号:
- SC26-2D
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
邦纳电子(苏州)有限公司 | 4006306336 | |
深圳市天为机电设备有限公司 | 0755-29412191 | |
福建菱瑞智能科技有限公司 | 0591-88688288 | 气动、传感器等自动化元器件,集科工贸于一体的系统集成商。 |
东莞创跃自动化设备有限公司 | 0769-23162780 | |
上海微觉信息技术有限公司 | 021-61488875 | |
深圳市中南科达科技有限公司 | 0755-86110175 | |
美国班纳工程国际有限公司 | ||
买道传感科技(上海)有限公司 | 021-51872140 | |
兰斯特(武汉)自动化系统工程有限公司 | 027-62433358 | |
广州市振欣自动化系统有限公司 | 020-85267788 | |
广州汇贤自动化设备有限公司 | 020-38845119 | |
东莞市创跃自动化设备有限公司 | 400-086-2004 |
产品介绍
Banner邦纳 SC26-2D 机器安全安全控制器和模块SC26系列安全控制器
SC26-2D - SC26-2D Safety Controller: Non Expandable; 26 Input; ; 2 Outputs (.5 A each); Display; No Ethernet; USB; 8 convertible Inputs; Removable Screw Terminals; 24 V dc; 120 mA
Banner邦纳
With a smaller footprint and addition of Boolean logic functions, the SC26-2 was designed to be easy to use, flexible and efficient. Monitors a variety of input devices such as e-stop buttons, rope pulls, enabling devices, protective safety stops, interlocked guards or gates, optical sensors, two-hand controls, and safety mats Boolean logic functions for programming flexibility Intuitive programming environment for easy implementation Pre-configured safety function blocks including two-hand control, muting and enabling device to simplify application programming Base Controller allows 8 of the 26 inputs to be configured as outputs for efficient terminal use Product Specifications Network Interface Ethernet 10/100 Base-T/TX, RJ45 modular connector Selectable auto negotiate or manual rate and duplex Auto MDI/MDIX (auto cross) Protocols: EtherNet/IP (with PCCC), Modbus/TCP Data: 64 configurable virtual status outputs; fault diagnostic codes and messages; access to fault log Power 24 V dc ± 20% (incl. ripple), 100 mA no load Ethernet models :add 40 mA Display models :add 20 mA Convertible I/O Sourcing current: 80 mA maximum at 55 °C (131 °F) operating ambient temperature (overcurrent protected) Safety Inputs Input On threshold: > 15 V dc (guaranteed on), 30 V dc max. Input Off threshold : < 5 V dc and < 2 mA, –3 V dc min. Input On current : 5 mA typical at 24 V dc, 50 mA peak contact cleaning current at 24 V dc Input lead resistance : 300 Ω max. (150 Ω per lead) Input requirements for a 4-wire Safety Mat :Max. capacity between plates: 0.22 μ F Max. capacity between bottom plate and ground: 0.22 μ F Max. resistance between the 2 input terminals of one plate: 20 Ω Solid State Safety Outputs 0.5 A max. at 24 V dc (1.0 V dc max. drop) Output OFF threshold : 1.7 V dc typical (2.0 V dc max.) Output leakage current: : 50 μ A max. with open 0V Load : 0.1 μ F max., 1 H max., 10 Ω max. per lead Operating Temperatures 0 °C to +55 °C (+32 °F to +131 °F) Environmental Rating NEMA 1 (IEC IP20), for use inside NEMA 3 (IEC IP54) or better enclosure Removable Screw Terminals Wire size: 24 to 12 AWG (0.2 to 3.31 mm²) Wire strip length : 7 to 8 mm (0.275 in to 0.315 in) Tightening torque : 0.565 Nm (5.0 in-lb) Removable Clamp Terminals Important: Clamp terminals are designed for 1 wire only. If more than 1 wire is connected to a terminal, a wire could loosen or become completely disconnected from the terminal, causing a short. Wire size : 24 to 16 AWG (0.20 to 1.31 mm²) Wire strip length : 8.00 mm (0.315 in) Mechanical Stress Shock: 15 g for 11 ms, half sine, 18 shocks total (per IEC 61131-2) Vibration : 3.5 mm occasional / 1.75 mm continuous at 5 Hz to 9 Hz, 1.0 g occasional and 0.5 g continuous at 9 Hz to 150 Hz: all at 10 sweep cycles per axis (per IEC 61131-2) Safety Category 4, PL e (EN ISO 13849) SIL CL 3 (IEC 61062, IEC 61508) Product Performance Standards See Standards and Regulations section in the Instruction Manual for a list of industry applicable U.S. and international standards. EMC Meets or exceeds all EMC requirements in IEC 61131-2, IEC 62061 Annex E, Table E.1 (increased immunity levels), IEC 61326-1:2006, and IEC61326-3-1:2008 Click to view the SC26-2 specification sheet in *.pdf format Click to view the SC26-2 brochure in *.pdf format
Machine Safety Safety Controllers and Modules SC26 Series Safety Controller