Carlo Gavazzi佳乐 DWS-V-DAC13 风速传感器-产品快照
- 品牌:
- Carlo Gavazzi
- 型号:
- DWS-V-DAC13
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
佳乐商贸(中国)有限公司 | 0755-83699500 | |
深圳市天为机电设备有限公司 | 0755-29412191 | |
上海北上自动化设备有限公司 | 400 7720 262 |
产品介绍
Carlo Gavazzi佳乐 DWS-V-DAC13 风速传感器
DWS-V-DAC13 CARLO GAVAZZI Selected parameters SYSTEM Sensor HOUSING Ø40 CONNECTION Cable FUNCTION Wind velo..
CARLO GAVAZZI
Selected parameters SYSTEM Sensor HOUSING Ø40 CONNECTION Cable FUNCTION Wind velosity OUTPUT DC NPN and PNP Others CABLE LENGTH 13 m MATERIAL Stainless Steel and PVC
Cup Anemometer PVC Housing, Rotorof black painted Stainless Steel Type DWS-V-DAC13 • Anemometer with opto-electronic detection • Measuring range: 2 to 30 m/s • PNP and NPN open collector outputs in the same unit • Current source outputs • 10 to 28 VDC supply voltage • All inputs and outputs are protected against reverse polarity and transients • High ESD protection • Built-in heater • Dust sealing Product Description Ordering Key DWS-V-DAC13 DWS-V-DAC13 is a cup anemometerdesignedfor measuringairspeedina wide variety of applications, includingwindturbines, buildings,cranes,weather stations, green-houses, etc. Theproductcontainsboth PNP- and NPN open collec- tor outputs, in which a fixed current is switched propor- tionallytotheair speedat therateof10pulsesper m/s. Abuilt-in self-regulated heaterreducestheriskof glazing. The heater is sup- plied separately, which makes it possible to control the heating. The DWS-V-DAC13 is equipped with a specially designed protection mecha- nism, which protects the bearings and the electronic parts against dirt and humidity. The bodyofthesensoris made of black PVC, and the rotor is produced in stain- less steel. Type Air velocity Digital output (Future subtypes) Cable Version Standard cable length in full metres*) *) can be specified by customer Specifications Rated operational voltage UB12 to 24 VDC UC10 to 28 VDC Supply current (without heater) Approx. 20 mA (all outputs off) Measuring range 1.5 to 30 m/s Accuracy ≤ 3 m/s: ±0.5 m/s ≥ 3 m/s: ±10% Output Specifications Signal output NPN Open Collector constant current sinkSquare wave 12.5 mA ± 2mA PNP Open Collector constant current source Square wave 12.5 mA ± 2mA Output frequency10 Hz per m/s Output power≤ 250 mW Load supply voltage Min. 10 VDC Max. 28 VDC Voltage dropTyp. 4.9 VDC General Specifications Dimensions Rotor diameter 145 mm ThreadExternal thread: M28 x 2 with one nut Materials Body Black PVC Rotor Stainless steel (AISI 303), black painted Bearings Instrument ball bearings, stainless steel Cable13 m shielded grey PVC, 6 x 0.25 mm2 Rotor/housing tighteningDust labyrinth Environment Degree of protection IP54 Ambient humidity0 to 100% RH Climatic protectionAgainst high humidity, salt and dust Ambient temperature Operating temperature -20 to 60°C (-4 to +140°F) Storage temperature-20 to 60°C (-4 to +140°F) Heating system> -20°C (> -4°F) Heater PTC-element Supply voltage 12 to 24 VAC/DC on separate wires Specifications are subject to change without notice (15.12.05)1
Categories: Temperature Sensors Sensors Encoders