Carlo Gavazzi佳乐 SHSUCOTHL 车载传感器-产品快照
- 品牌:
- Carlo Gavazzi
- 型号:
- SHSUCOTHL
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
佳乐商贸(中国)有限公司 | 0755-83699500 | |
深圳市天为机电设备有限公司 | 0755-29412191 | |
上海北上自动化设备有限公司 | 400 7720 262 |
产品介绍
Carlo Gavazzi佳乐 SHSUCOTHL 车载传感器
SHSUCOTHL CARLO GAVAZZI Selected parameters TYPE Environmental sensor HOUSING Wall mounting POWER SUPPLY Bu..
CARLO GAVAZZI
Selected parameters TYPE Environmental sensor HOUSING Wall mounting POWER SUPPLY Bus-powered Others TYPE Environmental sensor HOUSING Wall mounting POWER SUPPLY Bus-powered MAIN CHARACTERISTICS CO2/T/%RH sensor with traffic light LED
Smart Dupline® CO2, Temperature and Humidity Sensors w. RGB LED Type SHSUXXXXL • Bus-powered CO2, temperature and humidity sensors • Wall mounting • CO2 measuring range: 0 to 2000 ppm • Temperature measuring range: -20 to 50 °C • Humidity measuring range: 0 to 100 %RH • “Traffic light LED indication” for CO2 level • Low current consumption • Easy installation • Smart Dupline®protocol Product Description Ordering Key SH SU CO T H L TheSHSUXXXXL lineare bus-powered roomsensors forwall-mounting.They are available indifferentcombi- nations of CO2, temperature and relative humidity. The sensors have a “trafficlight” LED whichisusedtoindi- cate the CO2 level in green, amber or red colour. The only connectionneededforthe sensor is the Dupline®2-wire cable. Several sensors can be multi-droppedvia thesame Dupline® 2-wire bus, thereby simplifyingthe wiringtothe controller significantly. The address assignment and defi- nition of CO2 threshold levels are performedover the bus by using the SBWEB/SHWEB PC-based programming tool. Smart Dupline® Sensor CO2 Temperature Humidity LED 3-colour indication Type Selection Module typeIndication Supply: Bus-powered CO2 + TemperatureRGB LED SHSUCOTL CO2 + Temperature + Humidity RGB LED SHSUCOTHL Supply Specifications Power SupplySupplied by Dupline® Power on delay ≤ 3 s Dupline® Specifications Inputspecifications CO2 Measurement principle Non-Dispersive Infrared Technology (NDIR) Sensing element E+E Dual Source Infrared System Signal range 0 to 2000 ppm Accuracy Voltage8.2 V Maximum Dupline® voltage10 V Minimum Dupline® voltage 5.5 V Maximum Dupline® current SHSUCOTL 10 mA SHSUCOTHL10 mA RGB LED By means of the SBWEB/SHWEB configuration tool it is pos- sible to set the CO2 thresholds (green to yellow and yellow to red) to automatically light the LED in green, yellow or red colour depending on CO2 level. (@ 25°C and 1013mbar) < ± (50ppm +2% of meas- uring value) Response time Typ 300 s Temperature dependenceTyp. 2ppm CO2/°C (0...50°) Long term stabilityTyp. 20ppm / year Temperature Signal range -20 to 50 °C Inaccuracy+/-0,5°C Sample rate5 s Humidity Signal range 0 to 100 %RH Inaccuracy30%..70% : +/-3% 0%..100%: +/-5% Sample rate5 s Specifications are subject to change without notice (07.01.2014)1
Categories: Converters Fieldbuses Field Installation Bus and Safety Bus, Car Park “Guidance” System, Elevator Controls and Irrigation Systems