EZSV10 步进驱动器-产品快照
- 品牌:
- 型号:
- EZSV10
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,cs10@gchane.com , QQ1653501665 |
产品介绍
EZSV10 步进驱动器
AllMotion: Servo Drive (EZSV10 Series)
AllMotion: Servo Drive (EZSV10 Series) The EZServo was designed to allow the rapid implementation of DC Brush motor solutions in products requiring automation. The fully intelligent controllers, measuring just 0.95" x 1.4", require little or no tuning when used with most motors measuring less than 1.5" in diameter. (Default PID Values are robust and are stable with most motors). A single 4 wire bus, containing 2 power wires and two communications wires, links up to 16 such DC motors in a daisy chain (See Wiring Diagram ). Commands can be issued from any serial terminal program (such as HyperTerminal ) or from the EZServo /Stepper Windows application. The Commands are intuitive and simple. For example, the command A10000 will move the Servo motor to A bsolute position 10000 . (This communications protocol is compatible with devices that use the Cavro DT or OEM protocol.) Using our Starter Kits, a first time user is able to make a DC Brush Servo Motor move intelligently in less than half an hour. Features Single 4 wire bus linking up to 16 Stepper/Servo motors 2 Amp Peak, 1.5 Amp Continuous DC Brush Motor Driver 4 Quadrant Operation Operates from 12V-40V RS232, RS485 or USB Based Communications On Board EEPROM For User Program storage Stand alone operation with no connection to a PC Position Velocity and Torque modes Industry standard communications protocol Homes to an Opto or Encoder Index with a single command Fully programmable ramps and speeds Quadrature encoder based feedback Switch selectable device address Software selectable max currents 4MHz max encoder frequency Optional PWM or On/Off Output Optional ADC Inputs Halt / Branch On ADC Value Support Links EZSV10 Wiring Diagram EZSV10 Command Set EZServo Windows Application EZ Starter Kit Instructions EZSV10 Datasheet EZSV10 3D CAD Files EZSV10 on 3DContentCentral AllMotion: Servo Drive (EZSV10 Series) The EZServo was designed to allow the rapid implementation of DC Brush motor solutions in products requiring automation. The fully intelligent controllers, measuring just 0.95" x 1.4", require little or no tuning when used with most motors measuring less than 1.5" in diameter. (Default PID Values are robust and are stable with most motors). A single 4 wire bus, containing 2 power wires and two communications wires, links up to 16 such DC motors in a daisy chain (See Wiring Diagram ). Commands can be issued from any serial terminal program (such as HyperTerminal ) or from the EZServo /Stepper Windows application. The Commands are intuitive and simple. For example, the command A10000 will move the Servo motor to A bsolute position 10000 . (This communications protocol is compatible with devices that use the Cavro DT or OEM protocol.) Using our Starter Kits, a first time user is able to make a DC Brush Servo Motor move intelligently in less than half an hour. Features Support Links
Home Drives Intelligent Stepper Driver All Motion Servo Drive