EZHR17EN 步进驱动器-产品快照
- 品牌:
- 型号:
- EZHR17EN
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,cs10@gchane.com , QQ1653501665 |
产品介绍
EZHR17EN 步进驱动器
AllMotion: Stepper Drive (EZHR17EN Series)
AllMotion: Stepper Drive ( EZHR17EN S eries) EZStepper was designed to allow the rapid implementation of stepper motor solutions in products requiring automation. Measuring only 1.6" x 1.6" (40mm x 40mm), the fully intelligent stepper motor Controller + Drivers are designed to be bolted onto the back of the stepper motors that they control. A single 4 wire bus, containing 2 power wires and two communications wires, links up to 16 such stepper motor controllers in a daisy chain. Commands can be issued from any serial terminal program (such as HyperTerminal ) or from the EZStepper Windows application . The Commands are intuitive and simple. For example, the command A10000 will move the stepper motor to A bsolute position 10000 . (This communications protocol is compatible with devices that use the Cavro DT or OEM protocol.) The EZStepper is also capable of stand-alone operation with no connection to a PC. It can be set to execute a preset string of commands upon power up (i.e., only power is required in this mode). The Commands include nested loops and execution halt pending a switch closure, which is useful in stand-alone applications. The EZHR17EN Stepper Motor Controller will work with any stepper motor that is 3" or smaller ( size 23 or smaller). Our Starter Kits enable a first time user to make a Stepper Motor move intelligently in less than half an hour. Features Single 4 wire bus linking up to 16 stepper motor controllers 2 Amp Chopper (PWM) Driver Dual Encoders, position maintain mode Selectable step resolution from 1/2 to 1/256th step Up to 20 Million Microsteps / second Operates from 12V to 40V RS232, RS485 or USB based Communications On Board EEPROM For User Program storage Stand alone operation with no connection to a PC Execution Halt/Branch pending switch closure Pre-wired for OptoSwitch inputs (see wiring diagram ) Fits on the back of a size 17 stepper motor Industry standard communications protocol Homes to an Opto or Switch closure with a single command Fully programmable ramps and speeds Four Digital I/O and two 1 Amp Power On/Off Drivers included Switch selectable address Software selectable "Move" and "Hold" currents Hold Current automatically selected upon move completion Optional Second Stepper on Miniature Daughter card Optional Bidirectional DC Driver on Miniature Daughter Card 4 ADC Inputs, Branch Halt on ADC Value RoHS compliant Application Stories EZHR17EN Drives Marking Machine Support Links EZStepper Wiring Diagram EZStepper Command Set EZStepper Windows Application EZ Starter Kit Instructions EZHR17EN Datasheet EZHR17EN 3D CAD Files EZHR17EN on 3DContentCentral AllMotion: Stepper Drive ( EZHR17EN S eries) EZStepper was designed to allow the rapid implementation of stepper motor solutions in products requiring automation. Measuring only 1.6" x 1.6" (40mm x 40mm), the fully intelligent stepper motor Controller + Drivers are designed to be bolted onto the back of the stepper motors that they control. A single 4 wire bus, containing 2 power wires and two communications wires, links up to 16 such stepper motor controllers in a daisy chain. Commands can be issued from any serial terminal program (such as HyperTerminal ) or from the EZStepper Windows application . The Commands are intuitive and simple. For example, the command A10000 will move the stepper motor to A bsolute position 10000 . (This communications protocol is compatible with devices that use the Cavro DT or OEM protocol.) The EZStepper is also capable of stand-alone operation with no connection to a PC. It can be set to execute a preset string of commands upon power up (i.e., only power is required in this mode). The Commands include nested loops and execution halt pending a switch closure, which is useful in stand-alone applications. The EZHR17EN Stepper Motor Controller will work with any stepper motor that is 3" or smaller ( size 23 or smaller). Our Starter Kits enable a first time user to make a Stepper Motor move intelligently in less than half an hour. Features Application Stories Support Links
Home Drives Intelligent Stepper Driver All Motion Stepper Drive