EZCTRL17-ST 步进驱动器-产品快照
- 品牌:
- 型号:
- EZCTRL17-ST
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，cs10@gchane.com , QQ1653501665
|
产品介绍
EZCTRL17-ST 步进驱动器
AllMotion: Stepper Drive (EZCTRL17-ST Series)
AllMotion: Stepper Drive ( EZCTRL17-ST S eries) The EZController was designed to allow the rapid implementation of multi axis servo and stepper control, as well as perform I/O and Temperature control functions. Measuring only 1.6" x 1.6", the fully intelligent controllers allow automation to be achieved with ease. A single 4 wire bus, containing 2 power wires and two communications wires, links up to 16 such controllers in a daisy chain (see wiring diagram ). Commands can be issued from any serial terminal program (such as HyperTerminal ) or from the EZStepper Windows application . The Commands are intuitive and simple. For example, the command A10000 will move the stepper motor to A bsolute position 10000 . (This communications protocol is compatible with devices that use the Cavro DT or OEM protocol.) The EZ Controller is also capable of stand-alone operation with no connection to a PC. It can be set to execute a preset string of commands upon power up (i.e., only power is required in this mode). The Commands include nested loops and execution halt pending a switch closure, which is useful in stand-alone applications. The EZCTRL17-ST Motor Controller will work with any power stage uses STEP and DIRECTION or +/-10V inputs. In I/O Mode or Temperature control mode, simple commands allow easy programming of the Controller to achieve the desired function. Our Starter Kits supply all cables and accessories needed to facilitate wiring. Features Single 4 wire bus linking up to 16 Controllers 4Axis Step and Direction Controller 2Axis +/-10V Servo Controller 4 Channel Temperature Controller + Driver 12 Input , 8 Output I/O Controller Operates from 9V to 30V RS232, RS485 or USB based Communications Stand alone operation with no connection to a PC Execution Halt pending switch closure Pre-wired for OptoSwitch inputs (see wiring diagram ) Dual Encoder Readback, (Optional Encoder Feedback) Industry standard communications protocol Homes to an Opto or Switch closure with a single command Fully programmable ramps and speeds Switch selectable device address Support Links EZCTRL17-ST Wiring Diagram EZCTRL17-ST Command Set EZCTRL17-ST Windows Application EZCTRL17-ST EZCTRL17-ST 3D CAD Files EZCTRL17-ST on 3DContentCentral EZCTRL17-ST Data Sheet AllMotion: Stepper Drive ( EZCTRL17-ST S eries) The EZController was designed to allow the rapid implementation of multi axis servo and stepper control, as well as perform I/O and Temperature control functions. Measuring only 1.6" x 1.6", the fully intelligent controllers allow automation to be achieved with ease. A single 4 wire bus, containing 2 power wires and two communications wires, links up to 16 such controllers in a daisy chain (see wiring diagram ). Commands can be issued from any serial terminal program (such as HyperTerminal ) or from the EZStepper Windows application . The Commands are intuitive and simple. For example, the command A10000 will move the stepper motor to A bsolute position 10000 . (This communications protocol is compatible with devices that use the Cavro DT or OEM protocol.) The EZ Controller is also capable of stand-alone operation with no connection to a PC. It can be set to execute a preset string of commands upon power up (i.e., only power is required in this mode). The Commands include nested loops and execution halt pending a switch closure, which is useful in stand-alone applications. The EZCTRL17-ST Motor Controller will work with any power stage uses STEP and DIRECTION or +/-10V inputs. In I/O Mode or Temperature control mode, simple commands allow easy programming of the Controller to achieve the desired function. Our Starter Kits supply all cables and accessories needed to facilitate wiring. Features Support Links
Home Drives Intelligent Stepper Driver All Motion Stepper Drive
更多产品:
更多品牌:
