Texas Instruments TXS0104EPWR 物位仪器-产品快照
- 品牌:
- Texas Instruments
- 型号:
- TXS0104EPWR
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
得捷电子(上海)有限公司 | 400 920 1199 | |
深圳捷迈科技发展有限公司 | 0755-86128820 | |
上海贸泽电子有限公司 | ||
易络盟电子(中国)有限公司 | ||
深圳市鑫凯亚电子有限公司 |
产品介绍
Texas Instruments TXS0104EPWR 物位仪器
TEXAS INSTRUMENTS TXS0104EPWR Voltage Level Translator, 4 Input, 50 mA, 4.6 ns, 1.65 V to 5.5 V, TSSOP-14
TEXAS INSTRUMENTS
The TXS0104EPWR is a 4-bit Bidirectional Voltage-level Shifter for open-drain and push-pull applications. This non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA and accepts any supply voltage from 1.65 to 3.6V. VCCA must be less than or equal to VCCB. The B port is designed to track VCCB and accepts any supply voltage from 2.3 to 5.5V. This allows for universal low-voltage bidirectional translation between any of the 1.2, 1.5, 1.8, 2.5, 3.3 and 5V voltage nodes. When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. The TXS0104E is designed so that the OE input circuit is supplied by VCCA. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor. The minimum value of the resistor is determined by the current-sourcing capability of the driver. No direction-control signal needed Maximum data rates (24Mbps (push pull), 2Mbps (open drain)) 1.65 to 3.6V on A port and 2.3 to 5.5V on B port (VCCA ≤ VCCB) No power-supply sequencing required, either VCCA or VCCB can be ramped first Latch-up performance exceeds 100mA per JESD 78, class II Green product and no Sb/Br This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. No. of Inputs: 4 Output Current: - Propagation Delay: 4.6ns No. of Pins: 14Pins Logic Case Style: TSSOP Supply Voltage Min: 1.65V Supply Voltage Max: 5.5V Operating Temperature Min: -40°C Operating Temperature Max: 85°C Logic Type: Voltage Level Translator Packaging: Cut Tape Product Range: - Automotive Qualifications Standard: - MSL: MSL 1 - Unlimited Data Rate: 24 Mbps Supply Voltage Range: 1.65V to 3.6V, 2.3V to 5.5V SVHC: No SVHC (15-Jun-2015) Find similar products grouped by common attribute
Home Semiconductors - ICs Logic Level Shifters TXS0104EPWR