Texas Instruments TXS0102DCTT 物位仪器-产品快照
- 品牌:
- Texas Instruments
- 型号:
- TXS0102DCTT
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
得捷电子(上海)有限公司 | 400 920 1199 | |
深圳捷迈科技发展有限公司 | 0755-86128820 | |
上海贸泽电子有限公司 | ||
易络盟电子(中国)有限公司 | ||
深圳市鑫凯亚电子有限公司 |
产品介绍
Texas Instruments TXS0102DCTT 物位仪器
TEXAS INSTRUMENTS TXS0102DCTT Voltage Level Translator, 2 Input, 1 mA, 165 ns, 1.65 V to 3.6 V, SSOP-8
TEXAS INSTRUMENTS
The TXS0102DCTT is a 2-bit Bidirectional Voltage-level Shifter for open-drain and push-pull application. It can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A port supporting operating voltages from 1.65 to 3.6V while it tracks the VCCA supply and the B port supporting operating voltages from 2.3 to 5.5V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8, 2.5, 3.3 and 5V voltage nodes. When the output-enable input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor. The minimum value of the resistor is determined by the current-sourcing capability of driver. No direction-control signal needed Maximum data rates (24Mbps (push pull), 2Mbps (open drain)) 1.65 to 3.6V on A port and 2.3 to 5.5V on B port (VCCA ≤ VCCB) VCC isolation feature - If either VCC input is at GND, both ports are in the high-impedance state No power-supply sequencing required, either VCCA or VCCB can be ramped first IOFF supports partial power-down-mode operation Green product and no Sb/Br This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. No. of Inputs: 2 Output Current: 1mA Propagation Delay: 165ns No. of Pins: 8Pins Logic Case Style: SSOP Supply Voltage Min: 1.65V Supply Voltage Max: 3.6V Operating Temperature Min: -40°C Operating Temperature Max: 85°C Logic Type: Level Translator Packaging: Cut Tape Product Range: - Automotive Qualifications Standard: - MSL: MSL 1 - Unlimited Supply Voltage Range: 1.65V to 3.6V SVHC: No SVHC (15-Jun-2015) Find similar products grouped by common attribute
Home Semiconductors - ICs Logic Level Shifters TXS0102DCTT