DBI-Sala 3504427 坠落防护-产品快照

产品介绍

DBI-Sala 3504427 坠落防护

NewDBI-Sala Fall Protection Anchor Polyurethane Single

DBI-Sala

Ultra Lok AFT Self Retracting Anchors Ultra-Lok AFT self-retracting anchors are detachable, safe, robust are an excellent manually adjustable fall protection anchor. AFT anchors consist of two detachable parts, a lower and upper which can also be used as anchors at the end of a life line. Three workers can connect to the anchor using a retractable fall arrestor and harness. The retractable device is available in various lengths with a galvanised cable plus can be used in a horizontal configuration. FEATURES and BENEFITS:Self-retractingDetachableManually adjustableSafe brakingGalvanised cableIntegrated de-bounce functionReserve cableDouble swivel thermoplastic housingSafeRobustCan be used in a horizontal configurationCan be used with a lifelineCan be used with a retractable fall arrestor and harnessVarious lengths available CABLE and LENGTHS:Stock number 123-6190. Part number 3504427. 6 m long, 5 mm thickStock number 123-6191. Part Number 3504424. 9 m long, 5 mm thickStock number 123-6192. Part Number 3504465. 15 m long, 5 mm thick Standards EN360 Fall Arrest Legislative Information The Work at Height Regulations 2005 The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'. Essential Requirements Duty holders must ensure: all work at height, including emergencies and rescue is properly planned and organised;all work at height takes account of weather conditions that could endanger health and safety;those involved in work at height are trained and competent;the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used; the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;equipment for work at height is properly inspected and maintained;places of work at height are inspected and checked on each occasion before use existing places of work and means of access for work at heightcollective fall prevention (e.g. guard-rails, toe boards and working platforms)collective fall arrest (e.g. nets, airbags etc)personal fall protection (e.g. work restraints, fall arrest and rope access)ladders and step laddersinspection reports (for working platforms in construction only) The Regulations include Schedules giving requirements for: Schedules avoid work at height where they can; use work equipment or other measures to prevent falls where they cannot avoid working at height; and where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur. There is a simple hierarchy for managing and selecting equipment for work at height.Duty holders must: Risk Management Hierarchy those following good practice for work at height now should already be doing enough to comply with these Regulations; follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons; follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall. Key Messages The key messages the HSE wish to convey to duty holders through these Regulations are: ; Leg Type Single; Retractable Yes; Lifeline Material Galvanised; Casing Material Polyurethane; Extended Length 6m;

Safety, Security, ESD Control & Clean Room>Fall Arrest Harnesses, Kits & Equipment>Fall Arrest Blocks & Lifelines