Work Sharp WS3000 手柄-产品快照
- 品牌:
- Work Sharp
- 型号:
- WS3000
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,cs10@gchane.com , QQ1653501665 |
产品介绍
Work Sharp WS3000 手柄
Tool Sharpener, Worksharp WS3000
WORK SHARP
WS3000, Wood Tool Sharpener, Motor HP 0.25, 4 Phase, Voltage 115, 60 Hz, Amps AC 1.5, 1750 RPM, Overall Height 7 In., Overall Width 10 In., Overall Depth 6.5 In., Grinding Wheel Dia. 5.9055 In., Various Grit, Features Tempered Glass Wheels, Slotted 'see through' wheel, Air Cooled Dry-Sharpening System, Precise Repeatability, Standards ETL, Includes Work Sharp WS3000 (2) Tempered Glass Wheels (1) Slotted Wheel (1) Abrasives Kit (1) Crepe Stick (1) Top Tool Rest (1) User's Guide Zoro #: G4757121 Mfr #: WS3000 Hz : 60 Includes : Work Sharp WS3000 (2) Tempered Glass Wheels (1) Slotted Wheel (1) Abrasives Kit (1) Crepe Stick (1) Top Tool Rest (1) User's Guide Features : Tempered Glass Wheels, Slotted 'see through' wheel, Air Cooled Dry-Sharpening System, Precise Repeatability Application : Work Sharp is an air cooled, dry sharpening system that uses maintenance free 150mm tempered glass wheels for adhering PSA abrasives to. Work Sharp also offers a slotted 'see through' wheel for fast and precise sharpening of carving and lathe tools. Work Sharp's precise and repeatable sharpening port enables sharpening of 20, 25, 30, and 35 degree angle chisels and plane irons up to 2" wide. No jigs needed, just select angle and sharpen; lapping abrasive in sharpening port increases burr removal and speeds sharpening. Rigid bevel angle settings and Skew Cam provide precise positioning of the Sharpening Port. Bevel and skew geometry are not affected by wheel diameter, chisel size, or complex user setup. Forced air-cooling and the sharpening port heat sink allow for higher material removal rates without affecting the steel temper. The Work Sharp's design allows for quick reshaping of a new or damaged chisel, and fast honing of a micro bevel. Precise bevel angles are set in the Sharpening Port, not in a fixture or jig, so switching between angles is simple and fast. No re-calibration required for changing wheel diameter or tool size. User's can coarse grind for rapid shaping and then micro-fine hone in one port. Work Sharp is the complete sharpening solution for woodworkers! Standards : ETL Voltage : 115 Grinding Wheel Dia. (In.) : 5.9055 RPM : 1750 Grit : Various Type : WS3000 Amps AC : 1.5 Phase : 4 Overall Width (In.) : 10 Overall Height (In.) : 7 Overall Depth (In.) : 6.5 Motor HP : 0.25 Item : Wood Tool Sharpener Country of Origin (subject to change) : United States
Knobs, Handles, Workholding & Machine Tool Accessories Tool Sharpeners