MRC Bearings 5214MZZ 轴承-产品快照
- 品牌:
- MRC Bearings
- 型号:
- 5214MZZ
- 重量:
- 1.93404 kg
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，cs11@gchane.com , QQ1429311537
|
产品介绍
MRC Bearings 5214MZZ 轴承
MRC 5214MZZ DOUBLE ROW BALL BRGS
MRC Bearing
Item Details Manufacturer: MRC Bearing Service Weight: 4.257 lbs. Product Name: 5200-M Light Series Bearing Description: 70 mm ID x 125 mm OD x 1 9/16" Wide; Double Sealed; No Snap Ring; Maximum Capacity; Double Row Ball Bearing Specifications Inch/Metric Metric Bore Bore Type Round Bore I.D. 70 mm O.D. [Min] O.D. [Max] O.D. 125 mm Width [Min] Width [Max] Width 39 11/16 mm Enclosure Double Sealed Rows of Balls Double Material Steel O.D. Type Straight Bearing Type Angular Contact Precision Standard Radial Internal Clearance Specification Normal Clearance Ambient Temperature Range [Min] Ambient Temperature Range [Max] Ball Material Steel Cage Type Metal Capacity Maximum Capacity Contact Angle 30° Guide Type Lubrication Outer Ring Width 1 9/16 in Precision Level Standard (ABEC 1) Preload Level None Seal Material Rubber Seal Type Contact Seals Seal Width Dynamic Load Rating 22700 lbf Static Load Rating [Max] 28100 lbf Ball Dia. Bearing Design Bore B Cage Material Steel Collar No. Collar O.D. Collar Width Corner Radius [Min] Eccentric Collar Offset Fillet Radius 1 1/2 mm Flange O.D. [Max] Flange O.D. Flange Width [Max] Flange Width Flush Ground Housing Shoulder Diameter [Min] Housing Shoulder Diameter [Max] Housing Shoulder Diameter Industry Standard Part # Inner Ring O.D. Inner Ring Offset Inner Ring Width 1 9/16 in Internal Design Limiting Speed Limiting Speed - Grease 3200 rpm Limiting Speed - Oil 4300 rpm Limiting Speed - Sealed 3200 rpm Locking Device No Locking Device Lube Hole Center Lubricant Chevron SRI-2 Misalignment Range No. in Set Single Bearing No. of Balls O.D. (B) Outer Ring Outer Ring Inner Diameter Outer Ring Size Peak Running Torque (mg-mm) Peak Starting Torque (mg-mm) Pre Lubricant Preload Amount Radial Internal Clearance Normal Radial Load Rating [Max] Radial Rigidity (lbf/µm) Reference Speed Seal O.D. Seal Protection Width Seating Washer Series Set Screw Offset Set Screw Size Shaft Shoulder Diameter [Min] Shaft Tolerance Snap Ring No Snap Ring Snap Ring O.D. Snap Ring Offset Snap Ring Thickness Special Features Stamping Static Thrust Load Rating [Max] Temperature Range [Min] -22 °F Temperature Range [Max] 250 °F Use With Product Information Applications Used with heavy radial loads, two-directional thrust loads or a combination of both Thrust load should be carried on the nonfilling notch row Moderate thrust load is permissible on the filling notch row Features Has filling notches on one side to permit assembling the maximum number of balls into the bearing Contact angles converge outside the bearing All inner and outer rings have closure grooves Bearings may be equipped with seals, shields, snap rings or any combination Has very heavy radial capacity Thrust capacity in one direction, with the ability to accommodate light thrust load in the reversing direction One-piece, heat-treated steel for maximum retention; snapped into place after the full quota of balls has been introduced between the inner and outer ring Used with heavy radial loads, two-directional thrust loads or a combination of both Thrust load should be carried on the nonfilling notch row Moderate thrust load is permissible on the filling notch row
BRAND: MRC Bearing | MODEL: 5214MZZ | CONDITION: NEW | SKU: 1133021
Bearings
更多产品:
更多品牌:
